We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray PVC bulkhead fitting with threaded and socket ends

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BFAS1010CFS 1" Bulkhead Fitting FNPT x Socket trap

SKU CH-Y2VX-9NM9D MPN BFAS1010CFS

One-inch PVC bulkhead fitting with FNPT threads and a socket connection for curved or flat tanks, rated to 150 psi at 70 degrees F

  • TypeDrain Components
  • MaterialHAWA
  • ColorGray
  • 1" FNPT x socket bulkhead for direct tank-to-pipe connections
  • PVC body with FKM gasket resists chemicals up to 150 psi @ 70°F
  • Operates reliably from 40°F to 140°F in pool systems
  • Zero bolt holes simplify installation on curved or flat tank walls
  • Gray finish matches standard pool plumbing aesthetics

1" Bulkhead Fitting FNPT x Socket

This Hayward bulkhead fitting connects a 1-inch female threaded port to a 1-inch female socket port. It is built for pool and spa plumbing where a watertight seal through a tank wall is required. The PVC body and FKM gasket handle water treatment chemicals at temperatures between 40 and 140 degrees Fahrenheit. It installs on flat or curved tank surfaces without bolt holes.

Suited for PVC plumbing repairs

Installers who need a straight-through bulkhead transition from threaded pipe to solvent-weld socket will use this part. It is not for systems that require a flanged connection, a bolted flange pattern, or a gasket material other than FKM. Buyers needing a different pipe size, a male-threaded outlet, or a metal body should look at other fittings.

150 psi at 70 degrees Fahrenheit

The pressure rating of 150 psi at 70 degrees Fahrenheit is the key figure for deciding if this fitting matches the system design. Operating above this pressure or outside the 40 to 140 degree Fahrenheit range can compromise the seal. Verify the system pressure and temperature before specifying this component.

Highlights

  • 1" FNPT x socket bulkhead for direct tank-to-pipe connections
  • PVC body with FKM gasket resists chemicals up to 150 psi @ 70°F
  • Operates reliably from 40°F to 140°F in pool systems
  • Zero bolt holes simplify installation on curved or flat tank walls
  • Gray finish matches standard pool plumbing aesthetics

Specifications

TypeDrain Components
MaterialHAWA
ColorGray
BrandHayward
ModelBFAS1010CFS

Questions about this item

What size hole does the 1-inch bulkhead fitting need in the tank wall?

The fitting is designed for a 1-inch inside connection and 1-inch outside connection; drill the tank opening to match the bulkhead's flange diameter for a watertight seal.

How do I install the FNPT x socket bulkhead, and what step is often missed?

Thread the FNPT side into the tank port, solvent-weld the socket side to the pipe, and tighten the flange nuts evenly; the step often missed is lubricating the FKM gasket before assembly.

When should I replace the gasket on this PVC bulkhead fitting?

Inspect the FKM gasket each season; replace it if you see cracking, hardening, or leakage, especially after exposure near the 140-degree maximum operating temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.