We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray PVC bulkhead trap fitting with 3/4 inch threaded and socket connections

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BFAS1007CES 3/4" Bulkhead Trap

SKU CH-GKWF-F42AB MPN BFAS1007CES

A 3/4-inch PVC bulkhead trap with threaded and socket connections rated to 150 psi at 70 degrees F

  • TypeDrain Components
  • MaterialHAWA
  • ColorGray
  • Secure tank connection with 3/4" FNPT threaded interior
  • Leak-resistant EPDM gasket seals curved or flat tank walls
  • PVC construction handles 150 psi at 70 Degrees F
  • Operates reliably from 40 to 140 Degrees F
  • 3/4" socket exterior simplifies solvent-weld pipe installation

3/4" Bulkhead Trap for Tank Connections

This 3/4 inch bulkhead trap provides a secure pass-through fitting for curved or flat tanks. It connects female NPT threads on the inside to a female socket on the outside. The gray PVC body uses an EPDM gasket to seal the tank wall without bolt holes.

Pressure and Temperature Operating Window

The fitting withstands a maximum operating pressure of 150 psi at 70 degrees F. It functions continuously between a minimum of 40 degrees F and a maximum of 140 degrees F. Outside this range the material or seal may not perform as intended.

Female NPT to Female Socket Interface

The inside connection uses 3/4 inch female National Pipe Thread while the outside accepts a 3/4 inch socket. Both ends are female, so the installer must supply male-threaded pipe or a male adapter for the internal side and solvent-weld pipe for the external side.

Highlights

  • Secure tank connection with 3/4" FNPT threaded interior
  • Leak-resistant EPDM gasket seals curved or flat tank walls
  • PVC construction handles 150 psi at 70 Degrees F
  • Operates reliably from 40 to 140 Degrees F
  • 3/4" socket exterior simplifies solvent-weld pipe installation

Specifications

TypeDrain Components
MaterialHAWA
ColorGray
BrandHayward
ModelBFAS1007CES

Questions about this item

Will the 3/4" FNPT inside thread mate with my existing 3/4" male pipe threads?

Yes, the inside connection is a 3/4 in female NPT thread that accepts standard 3/4 in male pipe threads.

How can I confirm the EPDM gasket is sealing correctly at 150 psi?

Pressurise the system to the 150 psi rating at 70 Degrees F and check for leaks around the bulkhead flange and gasket.

Does the box include the 3/4" socket coupling for the outside connection or must I buy it separately?

The fitting has a 3/4 in socket outside connection; a matching 3/4 in PVC pipe or coupling for that socket is not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.