We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dark gray PVC bulkhead trap with 1 inch female threaded ends

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BFA1010TFS 1 in FNPT x FNPT Bulkhead Trap

SKU CH-H4Q8-BMYHD MPN BFA1010TFS

One-inch FNPT bulkhead trap with FKM gasket rated to 150 psi at 70 degrees F and up to 140 degrees F

  • TypeDrain Components
  • MaterialHAWA
  • ColorDark Gray
  • 1 in FNPT connections simplify tank plumbing
  • FKM gasket resists chemicals across 40 to 140 Degrees F
  • PVC body handles 150 psi at 70 Degrees F
  • Dark Gray finish matches pool equipment aesthetics
  • Bulkhead design fits curved or flat tank walls

Product identity

The Hayward BFA1010TFS is a one-inch FNPT bulkhead trap designed for pool and spa plumbing installations. It connects female-threaded pipe on both sides of a tank wall using PVC construction and an FKM gasket. The dark grey fitting suits curved or flat tank surfaces. It is intended for installers who need a straight-through drain connection.

Pressure and temperature limits

The fitting handles a maximum operating pressure of 150 psi measured at 70 degrees Fahrenheit. Its rated temperature range spans from a minimum of 40 degrees Fahrenheit up to 140 degrees Fahrenheit. No bolt holes are present, so sealing relies entirely on the threaded joints and gasket. The PVC body and FKM seal maintain integrity within these published limits.

Sustained service behaviour

Under continuous pressurised flow the PVC body and FKM gasket remain stable up to the 140-degree ceiling without bolt-hole reinforcement. The straight FNPT-by-FNPT path avoids flow restriction that could accelerate wear. Installers should verify chemical compatibility and support the piping independently because the fitting supplies no mechanical anchoring.

Highlights

  • 1 in FNPT connections simplify tank plumbing
  • FKM gasket resists chemicals across 40 to 140 Degrees F
  • PVC body handles 150 psi at 70 Degrees F
  • Dark Gray finish matches pool equipment aesthetics
  • Bulkhead design fits curved or flat tank walls

Specifications

TypeDrain Components
MaterialHAWA
ColorDark Gray
BrandHayward
ModelBFA1010TFS

Questions about this item

How do I install the BFA1010TFS bulkhead fitting on a curved or flat tank wall, and what is the step people often miss?

Drill the correct hole size for the 1 in FNPT threads, place the supplied FKM gasket on the flange side, thread the fitting through the wall, and hand-tighten the back nut; the missed step is forgetting the gasket, which causes leaks at the tank wall.

What maintenance or replacement will the BFA1010TFS need over time?

The FKM gasket can harden or crack after repeated thermal cycles between 40 and 140 Degrees F; inspect it annually and replace the gasket if seepage appears around the flange.

What is the first limit the BFA1010TFS hits under sustained pressure and heat?

The 150 psi @ 70 Degrees F pressure rating drops as temperature rises toward 140 Degrees F, so the combined pressure-temperature limit is reached before the PVC body or threads fail.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.