We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray PVC bulkhead fitting with FNPT and socket ends

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BFA1007CES Bulkhead Trap 3/4 in FNPT x Socket Gray

SKU CH-QX2F-DWH8R MPN BFA1007CES

Bulkhead tank fitting with PVC body and EPDM gasket connects 3/4 in FNPT to socket, rated 150 psi from 40 to 140 degrees F

  • TypeDrain Components
  • MaterialHAWA
  • ColorGray
  • 3/4 in FNPT x socket connection fits standard plumbing
  • EPDM gasket seals reliably across 40 to 140 Degrees F
  • PVC body withstands 150 psi operating pressure
  • Installs through 1 5/8 in hole up to 2.08 in wall thickness
  • Gray finish matches common pool equipment aesthetics

Bulkhead Tank Fitting 3/4 in

The Hayward BFA1007CES is a PVC bulkhead fitting designed for pool and spa plumbing installations. It connects a 3/4 inch FNPT thread to a socket joint through a tank wall. The gray body suits standard aquatic equipment aesthetics.

Sustained pressure and temperature performance

The fitting withstands continuous pressure up to 150 psi across a temperature range of 40 to 140 degrees Fahrenheit. An EPDM gasket maintains a reliable seal under these conditions. The design accommodates tank walls up to 2.08 inches thick.

Required hole size 1 5/8 in

Installation requires a precise 1 5/8 inch hole cut in the tank wall. This single dimension determines whether the part fits your existing or planned vessel. Verify the opening before purchase.

Highlights

  • 3/4 in FNPT x socket connection fits standard plumbing
  • EPDM gasket seals reliably across 40 to 140 Degrees F
  • PVC body withstands 150 psi operating pressure
  • Installs through 1 5/8 in hole up to 2.08 in wall thickness
  • Gray finish matches common pool equipment aesthetics

Specifications

TypeDrain Components
MaterialHAWA
ColorGray
BrandHayward
ModelBFA1007CES

Questions about this item

Does the gray PVC body handle continuous 150 psi pressure at 140 degrees F without leaking?

The fitting is rated for 150 psi maximum pressure and a temperature range of 40 to 140 degrees F, so it will hold that pressure at the upper temperature limit.

What pipe and tools do I need to connect the 3/4 in FNPT and socket ends?

You need 3/4 in PVC pipe for the socket side, 3/4 in male NPT threads for the FNPT side, PVC primer and cement for the socket joint, and thread sealant for the threaded joint.

Will the 1 5/8 in required hole size fit the cutout in my existing tank wall?

The bulkhead requires a 1 5/8 in hole and accepts wall thickness up to 2.08 in, so it fits tanks with that cutout and wall thickness.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.