Hayward Flow Control
Hayward Flow Control TBH1050ASTE0000 Ball Valve 1/2 in PVC/EPDM
A manual two-way ball valve with PVC body and EPDM seals handles corrosive chemicals and water at up to 250 psi
- True union design enables easy in-line maintenance
- Full-port PVC ball delivers unrestricted flow for corrosive media
- Locking tee handle prevents accidental valve position changes
- Rated to 250 psi for reliable shut-off under pressure
- PVC/EPDM construction resists chemical attack and extends service life
True union ball valve for chemical service
This two-way ball valve is built for corrosive chemical and water lines. The true union design lets you remove the valve body without cutting pipe, and the full-port PVC ball keeps flow unrestricted. A locking tee handle prevents accidental operation. It is suited to plant maintenance crews and process skid builders who need reliable isolation.
Sustained pressure performance at 250 psi
The valve holds its 250 psi rating continuously at room temperature rather than only in short bursts. PVC construction resists corrosion from aggressive media, so sealing performance does not degrade during long duty cycles. The three-piece body maintains alignment under thermal cycling, reducing the chance of leaks developing over weeks of operation.
Simple solvent-weld installation with union nuts
Solvent-cement the end connectors to the pipe, then tighten the union nuts to seat the body — no special tools or flange bolting required. The most common error is over-tightening the unions, which can distort the PVC seats and cause weeping. Ensure the handle is in the open position while cementing to avoid trapping stress on the ball.
Highlights
- True union design enables easy in-line maintenance
- Full-port PVC ball delivers unrestricted flow for corrosive media
- Locking tee handle prevents accidental valve position changes
- Rated to 250 psi for reliable shut-off under pressure
- PVC/EPDM construction resists chemical attack and extends service life
Specifications
| Brand | HAYWARD FLOW CONTROL |
|---|
Questions about this item
How much pressure can the 1/2 in PVC ball valve handle during continuous operation?
The valve is rated for a maximum operating pressure of 250 psi, making it suitable for sustained use in corrosive chemical or water lines.
What piping components are required to install this true-union valve?
You will need matching 1/2 in PVC pipe or tubing plus solvent cement or threaded adapters to connect the union ends securely.
Will the PVC body and EPDM seals hold up next to older metal fittings in the same line?
The PVC construction resists corrosion from chemicals and water, so it will not degrade when joined to existing metal components.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
