Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00922222BTC
In stock
Hayward Flow Control
Hayward Flow Control Bulkhead Tank Fitting 3/4 in PVC/FPM Socket 1007SFS
PVC bulkhead tank fitting with FKM gasket for 3/4 in socket connections, rated to 150 psi and 140 Degrees F
- TypePipes, Valves & Fittings
- PVC construction resists corrosion in pool systems
- FKM gasket handles chemicals up to 140 °F
- Socket ends allow solvent-weld joints without threading
- Rated for 150 psi working pressure
- Installs on curved or flat tank walls
Bulkhead Tank Fitting 3/4 in PVC/FPM Socket
The Hayward Flow Control bulkhead fitting provides a watertight pass-through for curved or flat tank walls. It uses a PVC body with an FKM gasket to seal the opening without bolt holes. The socket connection accepts 3/4 in pipe on both the interior and exterior sides. Rated for 150 psi at temperatures between 40 and 140 degrees F.
Socket Connection for Simple Plumbing Integration
The socket ends allow solvent-weld assembly directly to standard 3/4 in PVC pipe, removing the need for threaded adapters or additional couplings. This saves space inside the tank and reduces potential leak paths. The zero-bolt-hole design means the fitting seats flush against the wall, freeing up mounting area for other accessories or instrumentation.
FKM Gasket Extends Chemical Compatibility
The factory-supplied FKM gasket resists a wider range of aggressive fluids than standard elastomers, letting the same fitting serve in chlorinated, oily or mildly acidic circuits without a gasket swap. No separate sealing kit or lubricant is included, so installers should verify chemical compatibility and have solvent cement on hand before starting the job.
Highlights
- PVC construction resists corrosion in pool systems
- FKM gasket handles chemicals up to 140 °F
- Socket ends allow solvent-weld joints without threading
- Rated for 150 psi working pressure
- Installs on curved or flat tank walls
Specifications
| Brand | HAYWARD FLOW CONTROL |
|---|---|
| Type | Pipes, Valves & Fittings |
Questions about this item
What is the maximum operating pressure the bulkhead fitting can sustain during continuous use?
The fitting is rated for a maximum operating pressure of 150 psi, which is the limit under sustained operation.
How much heat does the fitting generate or dissipate when installed in a system running all day?
The fitting is a passive PVC component with no moving parts or electrical load, so it produces no measurable heat and requires no cooling during continuous operation.
What existing plumbing connection must the tank already have for this 3/4 inch socket fitting to install directly?
The tank needs a 3/4 inch female socket opening, because the fitting connects via a 3/4 inch socket on both the inside and outside ports.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
