We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White polypropylene bulkhead fitting with threaded female ends

Hayward Flow Control

Hayward Flow Control Bulkhead Fitting 1-1/4" PP/FPM FPT x FPT

SKU CH-R3XX-KWRZJ

Polypropylene bulkhead fitting with FKM gasket connects 1-1/4 inch female threads on curved or flat tanks up to 150 psi and 180 °F

  • TypePipes, Valves & Fittings
  • Secure tank connections with 150 psi pressure rating
  • Leak-resistant FKM gasket handles 40 to 180 °F
  • Polypropylene body resists corrosion on curved or flat tanks
  • Female threaded ends allow direct 1-1/4 in pipe attachment
  • Hayward Flow Control quality for reliable bulkhead installations

Bulkhead Fitting for Curved or Flat Tanks

This Hayward Flow Control bulkhead fitting connects pipework through tank walls that are either curved or flat. The body is moulded from polypropylene with a FKM gasket and offers female threaded ports on both sides. It is a new component supplied for plumbing installations that require a through-wall seal.

Suits 1-1/4" Female Threaded Connections

The fitting accepts 1-1/4 inch female threaded connections on the inside and outside, making it appropriate for systems built to that size. Builders working with different pipe diameters or male-threaded ends will need a different fitting, as will anyone requiring bolt-hole mounting flanges.

Rated for 150 psi at 180 °F

The maximum operating pressure is 150 psi and the maximum operating temperature is 180 degrees Fahrenheit, with a minimum of 40 degrees Fahrenheit. These limits define whether the fitting matches the demands of the intended fluid system.

Highlights

  • Secure tank connections with 150 psi pressure rating
  • Leak-resistant FKM gasket handles 40 to 180 °F
  • Polypropylene body resists corrosion on curved or flat tanks
  • Female threaded ends allow direct 1-1/4 in pipe attachment
  • Hayward Flow Control quality for reliable bulkhead installations

Specifications

BrandHAYWARD FLOW CONTROL
TypePipes, Valves & Fittings

Questions about this item

Will the polypropylene body and FKM gasket handle continuous 150 psi at 180 °F without softening or leaking?

The fitting is rated for a maximum operating pressure of 150 psi and a maximum operating temperature of 180 Degrees F, with a minimum of 40 Degrees F, so it is designed for continuous service within those limits.

Do I need any bolts, flanges or extra gaskets to mount this bulkhead fitting in a tank wall?

The fitting has zero bolt holes and uses its own FKM gasket, so no separate flange hardware or additional gaskets are required for installation.

Can I thread this 1-1/4" FPT fitting directly onto the male threads of my existing Schedule 80 PVC piping?

Both the inside and outside connections are 1-1/4 inch female threaded, so they will accept standard 1-1/4 inch male pipe threads such as those on Schedule 80 PVC nipples.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.