Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936626BTC
In stock
Hayward Flow Control
Hayward Flow Control BFAS3030TES 3 in bulkhead fitting PP EPDM FPT x FPT
Polypropylene bulkhead fitting with EPDM gasket, 3-inch female threaded connections, rated to 150 psi and 180 °F
- TypePipes, Valves & Fittings
- 3 in female-threaded ports simplify tank connections
- Polypropylene body resists chemical corrosion in harsh fluids
- EPDM gasket seals reliably across 40 to 180 °F range
- Rated for 150 psi maximum operating pressure
- Curved or flat tank compatibility eases installation flexibility
3-inch Bulkhead Tank Fitting
The Hayward Flow Control BFAS3030TES is a 3-inch bulkhead tank fitting designed for fluid-handling systems that require a through-wall connection. It suits installers working with curved or flat tank walls who need a female-threaded port on both sides of the barrier. The polypropylene body and EPDM gasket provide chemical compatibility for water and many aqueous solutions.
Pressure and Temperature Limits
This fitting carries a maximum operating pressure of 150 psi and operates between 40 and 180 degrees Fahrenheit. Systems that exceed either limit risk gasket failure or structural deformation. The zero bolt-hole pattern means the fitting relies on thread engagement and gasket compression alone for sealing.
Female Pipe Thread Connection
The single specification that determines fit is the 3-inch female pipe thread on both the inside and outside connections. Mating components must match this exact thread size and gender; adapters or reducers are required for any other pipe diameter or thread type.
Highlights
- 3 in female-threaded ports simplify tank connections
- Polypropylene body resists chemical corrosion in harsh fluids
- EPDM gasket seals reliably across 40 to 180 °F range
- Rated for 150 psi maximum operating pressure
- Curved or flat tank compatibility eases installation flexibility
Specifications
| Brand | HAYWARD FLOW CONTROL |
|---|---|
| Type | Pipes, Valves & Fittings |
Questions about this item
Should I choose a different size or material version of this bulkhead fitting?
This model is a 3 in polypropylene fitting with EPDM gaskets and female pipe threads on both sides; other sizes or materials would be separate part numbers.
What does the 150 psi pressure rating mean when the fitting is installed in a tank?
It indicates the maximum continuous internal pressure the fitting can withstand at up to 180 °F; system pressure must stay at or below 150 psi.
How do the female pipe threads affect what pipe or adapter I can connect?
Both the inside and outside connections are 3 in female pipe threads, so you need male-threaded pipe or adapters of the same size to join them.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
