We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White CPVC bulkhead tank fitting with socket ends

Hayward Flow Control

Hayward Flow Control BFA2007CFS Bulkhead Tank Fitting 3/4 in CPVC/FPM Socket

SKU CH-581A-J4QG3

Bulkhead tank fitting with CPVC construction and FKM gasket, rated for 150 psi and 40 to 190 °F

  • TypePipes, Valves & Fittings
  • CPVC construction resists corrosion in harsh chemical environments
  • FKM gasket material provides reliable sealing across temperature extremes
  • 150 psi pressure rating handles demanding industrial applications
  • Operates reliably from 40 to 190 degrees Fahrenheit
  • Socket connections simplify installation on curved or flat tanks

Tank fitting for curved or flat walls

This bulkhead tank fitting connects piping through curved or flat tank walls using a 3/4 in CPVC socket on both sides. It suits plumbing installers and maintenance teams who need a reliable pass-through for fluid systems. The FKM gasket handles temperatures from 40 to 190 Degrees F and pressures up to 150 psi. Buyers needing a threaded or flanged connection cannot use this socket-only model.

CPVC body with FKM seal

The fitting body is moulded from CPVC for chemical resistance and the gasket uses FKM for broad fluid compatibility. Both internal and external connections are female sockets sized at 3/4 in, allowing direct solvent welding of CPVC pipe. No bolt holes are present, so the fitting relies on the socket joint and gasket compression for sealing. Installers must verify that the tank wall thickness matches the fitting length.

Socket connection ready for solvent welding

The package supplies the bulkhead fitting with its FKM gasket installed. No additional adapters, tools or lubricants are included, so the installer provides CPVC primer, cement and pipe. The socket-by-socket design simplifies assembly on site but requires clean, square pipe cuts for a leak-free joint. Systems needing a different gasket material or a larger bore will require a separate fitting.

Highlights

  • CPVC construction resists corrosion in harsh chemical environments
  • FKM gasket material provides reliable sealing across temperature extremes
  • 150 psi pressure rating handles demanding industrial applications
  • Operates reliably from 40 to 190 degrees Fahrenheit
  • Socket connections simplify installation on curved or flat tanks

Specifications

BrandHAYWARD FLOW CONTROL
TypePipes, Valves & Fittings

Questions about this item

What pressure does the 3/4 in socket connection handle at its 150 psi rating?

The bulkhead tank fitting is rated for a maximum operating pressure of 150 psi at the 3/4 inch socket connection, suitable for CPVC piping systems.

What tank wall thickness does the BFA2007CFS accommodate for curved or flat surfaces?

The fitting mounts on both curved and flat tank walls without bolt holes, using a compression nut and FKM gasket to seal against the tank surface.

How do you install the socket ends correctly, and what step prevents leaks?

Apply CPVC solvent cement to both 3/4 inch socket ends, insert pipes fully, hold briefly, and ensure the FKM gasket seats evenly before tightening the compression nut.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.