Hayward Flow Control
Hayward Flow Control 1075 Ball Valve True Union 3/4 in PVC EPDM 250 psi
Manual two-way ball valve in PVC/EPDM handles corrosive chemicals and water at 250 psi with a locking tee handle
- True union design simplifies maintenance
- Full port ball ensures unrestricted flow
- Locking tee handle prevents accidental operation
- PVC and EPDM construction resists corrosive chemicals
- Rated for 250 psi maximum operating pressure
Hayward True Union 3/4 in Ball Valve
The Hayward TBH1075ASTE0000 is a manual two-way ball valve built for corrosive chemicals and water service. Its PVC body and EPDM seals suit industrial and plumbing circuits that demand chemical resistance. The full-port design maintains flow without restriction across the 3/4 inch nominal size.
True Union design simplifies installation
The three-piece true union body lets you thread or solvent-weld the end connectors before dropping the centre section into place, so pipe alignment is less critical. A locking tee handle prevents accidental actuation during vibration or maintenance. Over-tightening the union nuts can stress the PVC threads, so hand-tight plus a quarter turn is the usual practice.
Verify pressure, media
Confirm the system never exceeds the 250 psi operating limit and that the fluid is compatible with PVC and EPDM materials. The valve is not rated for steam, combustible gas or vacuum service, so those applications must use a different product. Ensure your pipe schedule and joining method match the supplied end connectors.
Highlights
- True union design simplifies maintenance
- Full port ball ensures unrestricted flow
- Locking tee handle prevents accidental operation
- PVC and EPDM construction resists corrosive chemicals
- Rated for 250 psi maximum operating pressure
Specifications
| Brand | HAYWARD FLOW CONTROL |
|---|
Questions about this item
How can I confirm the valve is operating correctly after installation?
Pressurize the system up to 250 psi and verify no leaks at the true-union connections; the full-port PVC ball should turn smoothly with the locking tee handle.
What components are included and what must be purchased separately?
The valve body, PVC ball, EPDM seals, locking tee handle and true-union ends are supplied; pipe, solvent cement and any mounting brackets are not.
Which size and pressure rating should I select for my application?
Choose the 3/4 in nominal size with a 250 psi maximum operating pressure when handling corrosive chemicals or water in a straight three-piece PVC valve.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
