We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Micro USB male-to-female switch cable, 28 cm, inline 501 on/off button

HATMINI YMH2023040 Micro USB Male-to-Female Switch Cable 501 28CM

SKU CH-WEHA-DWPS8

A 28 cm Micro USB male-to-female cable with a 501 on/off switch for 5 V 2 A charging and 480 Mbps data

  • TypeUSB
  • Connector TypeMicro USB
  • ColorBlack
  • Connector Number5
  • Connector DetailMicro USB
  • Terminal GenderMale-to-Female
  • Manual 501 switch cuts power without unplugging
  • 28 cm copper cable keeps charging at 5 V 2 A
  • 480 Mbit/s data pass-through on Micro USB
  • Lightweight 22 AWG wire adds minimal bulk
  • Male-to-female design protects device port from wear

Micro USB Switch Cable

This 28 cm Micro USB male-to-female extension cable adds a manual on-off switch so you can cut power without unplugging the connector. It is intended for users who frequently restart Micro USB devices such as development boards, routers or peripherals and want to reduce wear on the port. The 501-type switch toggles between connected and disconnected states with a single press. It supports 5 V at up to 2 A for standard charging scenarios.

Plug-and-play installation

No drivers are required; simply insert the male end into the host or charger and the female end into the device. The 22 AWG copper conductors handle the rated current, and the short length keeps voltage drop minimal. A common issue is accidentally pressing the switch during handling, which interrupts power to the attached device. Ensure the switch is firmly in the "on" position before assuming a fault with the cable or power source.

Sustained load behaviour

The cable is rated for continuous operation at 5 V and 2 A, matching typical USB 2.0 charging limits. Under steady load the copper conductors and switch contacts maintain stable transmission without overheating, provided the connected device does not exceed the 2 A maximum. The 501 switch mechanism is designed for repeated cycling, avoiding the mechanical stress that frequent plugging and unplugging places on the Micro USB port.

Highlights

  • Manual 501 switch cuts power without unplugging
  • 28 cm copper cable keeps charging at 5 V 2 A
  • 480 Mbit/s data pass-through on Micro USB
  • Lightweight 22 AWG wire adds minimal bulk
  • Male-to-female design protects device port from wear

Specifications

BrandHATMINI
ModelYMH2023040
TypeUSB
Connector TypeMicro USB
ColorBlack
Connector Number5
Connector DetailMicro USB
Terminal GenderMale-to-Female
Speed480 megabits_per_second
ConstructionCopper
FeaturesLightweight

Questions about this item

How can I verify the 501 switch on the Micro USB cable is functioning correctly after connecting it?

Press the switch to the "on" position; the connected Micro USB device should power up and, if it supports data, transfer at up to 480 megabits per second. Press to "off" and the device should lose power immediately without unplugging.

What comes in the package and do I need any extra cables or adapters to use it?

The box contains three Micro USB male-to-female extension cords, each about 28 cm long with a built-in 501 on/off switch. No additional cables are required; plug the male end into your power source and your device into the female end.

Which switch version should I choose if I want the 501 model for Micro USB devices?

Select the variant listed with the 501 switch and Micro USB connectors; it supports 5 V at 2 A, uses 22 AWG copper wire and provides both charging and data pass-through up to 480 megabits per second.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.