Harris
Harris 1501240 Cutting Tip 6290-2NX Size 2
Cutting tip for hand or machine torches using natural gas or propane, fits series 6290-NX size 2 with two-piece design and cuts up to 2 in thick steel
- Size/Dimensions2
- MaterialHAWA
- Type1 Piece
- Compatible with natural gas and propane for flexible fuel use
- Two-piece tip design handles cuts up to 2 in thick
- Fits Harris 42-4E, 42-4F, 62-5E, 62-5F, 62-5SSF, 980F torches
- Works with 39-3F, 49-3AF, 49-3F, 72-3, 73-3 cutting attachments
- Built for demolition, shipbuilding and steel fabrication applications
Harris 1501240 Cutting Tip 6290-2NX Size 2
This Harris 1501240 cutting tip belongs to the 6290-NX series and carries the Size 2 designation. It is built from HAWA material as a single-piece unit. The tip fits handheld and machine torches used in demolition, shipbuilding and steel fabricating work.
Capacity and headroom
The tip handles a maximum cutting thickness of 2 in with natural gas or propane fuel. It runs out beyond that thickness and is not intended for heavier plate. Compatible torch series include 42-4E, 42-4F, 62-5E, 62-5F, 62-5SSF and 980F for direct mounting.
Series compatibility decides fit
The tip also matches cutting attachments 39-3F, 49-3AF, 49-3F, 72-3 and 73-3. It will not seat on torches or attachments outside the listed 42, 62, 980, 39, 49, 72 and 73 series. Buyers with other equipment need a different tip series.
Highlights
- Compatible with natural gas and propane for flexible fuel use
- Two-piece tip design handles cuts up to 2 in thick
- Fits Harris 42-4E, 42-4F, 62-5E, 62-5F, 62-5SSF, 980F torches
- Works with 39-3F, 49-3AF, 49-3F, 72-3, 73-3 cutting attachments
- Built for demolition, shipbuilding and steel fabrication applications
Specifications
| Brand | Harris |
|---|---|
| Size/Dimensions | 2 |
| Material | HAWA |
| Type | 1 Piece |
Questions about this item
Will the 6290-2NX size 2 tip fit my existing Harris 42-4E torch?
Yes, the 6290-2NX is listed as compatible with the Harris 42-4E series cutting torch.
How do I verify the 6290-2NX is cutting correctly after installation?
Check for a clean, narrow kerf and steady oxygen stream when cutting up to 2 in thick steel plate.
Does the 1501240 package include the cutting torch or just the tip?
The box contains one 6290-2NX cutting tip only; the torch and attachment are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
