We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Angled brass needle valve with steel handle, 1/8 by 1/4 inch connections

Hansen

Hansen 320 angled brass needle valve 1/8 x 1/4 in

SKU CH-176D-HSH32

Angled brass needle valve with 1/8 x 1/4 in MNPT-to-tube connections rated for 150 psi and 0 to 250 °F

  • TypePipes, Valves & Fittings
  • Precise flow control with angled brass needle design
  • Durable brass body rated for 150 psi maximum pressure
  • Wide temperature range from 0 to 250 degrees Fahrenheit
  • Compact size fits tight spaces at 1 35/64 inch height
  • Steel handle provides reliable manual operation leverage

Hansen 320 angled brass needle valve

The Hansen 320 is an angled brass needle valve designed for precise flow control in fluid-handling systems. It suits installers and maintenance technicians who need a compact shut-off or metering point on small-bore piping.

MNPT x tube connection with brass stem

The valve combines a male NPT inlet with a tube-compression outlet, letting it join threaded pipe to tubing without extra adapters. Its brass stem and metal-to-metal seal deliver reliable shut-off at the rated pressure.

150 psi rating and 0 to 250 °F range

The valve handles pressures up to 150 psi and temperatures from 0 to 250 °F, covering common water, oil and air lines. It is not suited for systems that exceed this pressure ceiling or require soft-seat bubble-tight sealing.

Highlights

  • Precise flow control with angled brass needle design
  • Durable brass body rated for 150 psi maximum pressure
  • Wide temperature range from 0 to 250 degrees Fahrenheit
  • Compact size fits tight spaces at 1 35/64 inch height
  • Steel handle provides reliable manual operation leverage

Specifications

BrandHANSEN
TypePipes, Valves & Fittings

Questions about this item

Will the brass stem or metal seal need replacement after long service?

The valve uses a brass stem and metal-to-metal seal rated to 250 °F and 150 psi; under normal water or air service the stem typically outlasts the piping, so replacement is rarely needed.

At 150 psi continuous pressure, which limit appears first — leakage or temperature?

The 150 psi pressure rating is the primary design limit; temperature only becomes restrictive above 250 °F, so sustained pressure at ambient temperature is the governing factor.

Does the steel handle or brass body get hot enough to burn during all-day flow at 250 °F?

At the maximum 250 °F rating both brass body and steel handle reach fluid temperature, so insulation or a heat shield is advisable for operator safety during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.