HANNORD
HANNORD VGA Cable Male to Male 15 Pin 3.3 ft Black Blue
Connects a PC or laptop to a monitor or projector at up to 1920x1080P resolution with dual ferrite cores for EMI and RFI protection
- TypeMale to Male
- ColorBlack & Blue
- Length3.3 ft.
- Connect From1 x VGA
- Connect To1 x VGA
- Connector DetailVGA to VGA
Cable Length 33 Feet
- 5 Feet
- 6 Feet
- 10 Feet
- 33 Feet
- 16.4 ft. / 5m
- 15-pin male connectors fit VGA ports on PCs and monitors
- Supports 1920 x 1080 resolution for Full HD displays
- Ferrite cores reduce EMI and RFI signal interference
- 28AWG tinned copper conductors with foil and braid shielding
- Molded strain relief and finger-tightened screws ensure secure connection
15-Pin Male-to-Male VGA Cable
This 3.3 ft HANNORD cable carries analog video from a desktop or laptop to any monitor or projector with a 15-pin VGA input. Stranded 28 AWG tinned-copper conductors and foil-plus-braid shielding protect the signal, while dual ferrite cores suppress EMI and RFI. Gold-plated pins and finger-tightened screws ensure a secure, low-resistance connection.
Fits Standard VGA Ports Without Adapters
The male-to-male layout plugs directly into legacy graphics outputs and display inputs, freeing up HDMI or DisplayPort sockets for newer devices. Molded strain relief and grip treads withstand repeated insertion in tight rear-panel spaces. No external power or active conversion is required, so the cable works with any system that presents a native VGA signal.
Passive Design Runs Cool and Silent
With no active electronics the cable draws zero power and generates no heat or noise during operation. Shielding and ferrite cores keep crosstalk low, delivering a clean 1080P image at 99.9 % signal integrity. The 3.3 ft length suits desktop-to-monitor runs without excess slack that could degrade the analog signal.
Highlights
- 15-pin male connectors fit VGA ports on PCs and monitors
- Supports 1920 x 1080 resolution for Full HD displays
- Ferrite cores reduce EMI and RFI signal interference
- 28AWG tinned copper conductors with foil and braid shielding
- Molded strain relief and finger-tightened screws ensure secure connection
Specifications
| Type | Male to Male |
|---|---|
| Color | Black & Blue |
| Length | 3.3 ft. |
| Connect From | 1 x VGA |
| Connect To | 1 x VGA |
| Connector Detail | VGA to VGA |
| Terminal Gender | Male to Male |
| Specifications | 1080P Full HD |
| Shielding | Yes |
| Conductor | Stranded 28AWG Tinned Copper |
Other versions of this model
4 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
HANNORD VGA cable male to male 3.3 ft 15 pin 1080P
- Male to Male
- Black & Blue
HANNORD VGA Cable Male to Male 3.3 ft 1080P 15 Pin Black Blue
- Male to Male
- Black & Blue
Questions about this item
What resolution limit appears first during sustained use?
The cable supports up to 1920x1080P and the listed 800x600, 1024x768, 1600x1200 modes without a lower sustained-use ceiling.
Does the cable run hot or draw noticeable power after hours of operation?
Passive copper construction with 28AWG stranded conductors and dual ferrite cores produces no heat and draws no power of its own.
What ports must the computer and display already have for this cable to work?
Both devices need a 15-pin VGA female port to accept the male connectors on each end.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.







