We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black USB-A to RJ45 console cable with moulded boot, ten-foot length

HANNORD

HANNORD USB to RJ45 Console Cable FTDI 10ft

SKU CH-DCX9-ZM979

USB-to-RJ45 console cable with FTDI chip for configuring Cisco, Juniper, HP and other network gear from a laptop USB port

  • Connect laptops directly to network console ports without legacy serial adapters using the FTDI FT232RL chip
  • 10 ft cable length gives flexible reach between workstation and rack-mounted switches or routers
  • USB 2.0 interface with RS-232 signalling up to 500 kbaud for reliable configuration sessions
  • Plug-and-play driver support on Windows 32-bit and 64-bit, Mac and Linux; Chrome OS not supported
  • Replaces DB-9 and DB-25 connectors with a single RJ-45 console link for Cisco, Juniper, HP, Arista and more

Network console cable for engineers

The HANNORD USB to RJ45 console cable links a laptop or PC USB port directly to the console port of Cisco, Juniper, HP, Arista, Aruba, Huawei and other network devices. It replaces legacy DB-9 or DB-25 serial adapters so engineers can configure routers, switches and firewalls without extra dongles. The 10 ft length gives reach across a rack or bench.

USB 2.0 plug-and-play with FTDI chip

The cable uses an FT232RL chip for driver stability on 32-bit and 64-bit Windows, Mac and Linux systems; Chrome OS is not supported. Most modern operating systems install the driver automatically, otherwise it is available from the FTDI website. The USB 2.0 interface is backward compatible with USB 1.1 hosts, and no external power is required.

RS-232 signalling up to 500 kbaud

The RJ45 connector follows the Cisco DTE pinout with RTS, DTR, TXD, dual GND, RXD, DSR and CTS on pins 1 through 8. Maximum RS-232 signalling rate is 500 kbaud, suitable for standard console sessions. The copper conductors and moulded strain relief maintain signal integrity during extended debugging sessions without data loss.

Highlights

  • Connect laptops directly to network console ports without legacy serial adapters using the FTDI FT232RL chip
  • 10 ft cable length gives flexible reach between workstation and rack-mounted switches or routers
  • USB 2.0 interface with RS-232 signalling up to 500 kbaud for reliable configuration sessions
  • Plug-and-play driver support on Windows 32-bit and 64-bit, Mac and Linux; Chrome OS not supported
  • Replaces DB-9 and DB-25 connectors with a single RJ-45 console link for Cisco, Juniper, HP, Arista and more

Specifications

No published specifications for this item yet.

Questions about this item

What is the maximum RS232 baud rate this cable supports?

The cable handles up to 500 kbaud over the RS232 link, so sustained console sessions stay within that ceiling.

Does the FTDI chip draw enough power to warm up during all-day use?

The FT232RL runs from the USB port and stays cool during continuous operation; no external power is needed.

Which operating systems must the laptop already run for the cable to work?

Windows 32-bit and 64-bit, Mac, and Linux are supported; Chrome OS is not compatible.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.