HANNORD
HANNORD SATA 15 pin to 6 pin PCIe power cable 20cm
A 20 cm adapter converts a SATA 15 pin connector to a 6 pin PCIe plug, powering graphics cards such as the GTX 750 Ti, GTX 1070 Ti or GTX 1080 Ti when the power supply lacks native PCIe leads
- ColorBlack
- Powers a PCIe video card from a SATA 15 pin connector using the included 20cm adapter
- 20cm length keeps internal cable routing tidy and manageable inside the case
- Reduces strain on motherboard and drive connectors by avoiding tight bends near hard-to-reach ports
- Works with existing SATA power supply so no PSU upgrade is required for PCIe graphics
- Compatible with GeForce GTX 1080 Ti, GTX 750 Ti and GTX 1070 Ti video cards
Power adapter for PCIe graphics cards
This HANNORD cable converts a SATA 15 pin connector into a 6 pin PCIe plug so a graphics card can draw power from an existing SATA supply line. It targets builders who lack native PCIe power connectors on their power supply and want to add a compatible video card without replacing the unit. The 20 cm length keeps the run short for tidy internal routing.
Thermals noise and power draw
The adapter itself is a passive wiring harness with no active components, so it adds no fan noise or heat of its own. Power delivery depends entirely on the host power supply’s SATA rail capacity and the graphics card’s draw; the cable simply passes current between the two connectors. No thermal or acoustic characteristics are introduced by the adapter.
Bundled accessories and software
Only the single 20 cm black cable is included; there are no extra adapters, mounting hardware or software utilities in the package. The product’s value is limited to the physical connection it provides between a SATA power source and a 6 pin PCIe input. Buyers who need multiple adapters or longer runs will have to purchase additional units separately.
Highlights
- Powers a PCIe video card from a SATA 15 pin connector using the included 20cm adapter
- 20cm length keeps internal cable routing tidy and manageable inside the case
- Reduces strain on motherboard and drive connectors by avoiding tight bends near hard-to-reach ports
- Works with existing SATA power supply so no PSU upgrade is required for PCIe graphics
- Compatible with GeForce GTX 1080 Ti, GTX 750 Ti and GTX 1070 Ti video cards
Specifications
| Color | Black |
|---|
Other versions of this model
3 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
How do I install the SATA 15 pin to 6 pin adapter and what step is often missed?
Plug the 15-pin SATA end into a free power-supply SATA connector, then attach the 6-pin PCIe side to the graphics card; the step often missed is ensuring the SATA connector clicks fully home so pins cannot back out under load.
What maintenance or replacement will this 20 cm adapter need later?
No scheduled maintenance is required; replace the cable only if the SATA latch breaks, the 6-pin housing cracks, or you see discoloured pins from prolonged high-current use.
What limit appears first when a GTX 1080 Ti draws sustained power through this adapter?
The single SATA power connector’s current rating is reached before the cable length or the 6-pin plug becomes a bottleneck, so sustained loads on a GTX 1080 Ti can exceed what one SATA lead can safely deliver.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114903BTC
In stock
