HANNORD
HANNORD DisplayPort 1.4 Switch 3-Port 8K@30Hz 4K@120Hz 1080P@240Hz 32.4Gbps
A three-port DisplayPort 1.4 switch toggles between two sources or two displays at up to 8K 30 Hz, 4K 120 Hz or 1080p 240 Hz with 32.4 Gbps bandwidth
- TypeDisplayPort Switchers
- Changer TypeDisplayPort Switch/Extender
- ColorBlack
- Ports3-Port
- Specifications8K Ultral HD
- Input ConnectorDisplayPort 1.4
- Supports 8K at 30 Hz resolution
- Delivers 4K at 120 Hz for smooth motion
- Handles 1080p at 240 Hz high refresh
- Provides 32.4 Gbps bandwidth for fast data
- Switches between two sources or displays manually
3-Port DisplayPort 1.4 Switch
The HANNORD switch provides three DisplayPort 1.4 connections in a bidirectional layout. It operates as a 2-in-1-out or 1-in-2-out device for PC, laptop or monitor setups. Only one output is active at a time.
Bandwidth and resolution limits
The unit delivers up to 32.4Gbps throughput and supports 8K at 30Hz, 4K at 120Hz and 1080P at 240Hz. A standard DP1.4 cable and the supplied USB power cable are mandatory for stable operation. Total cable length must not exceed 3m.
Suited for single-active-display switching
Ideal for users toggling between two sources on one monitor or one source across two monitors. Not suitable for buyers who need simultaneous dual-display output or MST hub functionality. Also incompatible with the HP ZR30W due to a system limitation noted by the manufacturer.
Highlights
- Supports 8K at 30 Hz resolution
- Delivers 4K at 120 Hz for smooth motion
- Handles 1080p at 240 Hz high refresh
- Provides 32.4 Gbps bandwidth for fast data
- Switches between two sources or displays manually
Specifications
| Brand | HANNORD |
|---|---|
| Type | DisplayPort Switchers |
| Changer Type | DisplayPort Switch/Extender |
| Color | Black |
| Ports | 3-Port |
| Specifications | 8K Ultral HD |
| Input Connector | DisplayPort 1.4 |
| Output Connector | DisplayPort 1.4 |
Questions about this item
What does the 8K@30Hz rating mean when I connect this switch to my PC and monitor?
It means the switch can pass an 8K signal at 30 frames per second from one source to one display, but the two connected displays cannot show an image at the same time.
How does the DisplayPort 1.4 interface limit the resolutions I can actually run?
The DP 1.4 link caps the bandwidth at 32.4Gbps, which allows 8K at 30Hz, 4K at 120Hz or 1080P at 240Hz, but only one output is active at any moment.
What cables and power does the unit need to fit into my current setup?
You must use standard DP 1.4 cables no longer than 3 metres total and connect the supplied USB cable for power, otherwise the source or display will not show an image.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



