HANNORD
HANNORD 22-pin (7+15) SATA Male to Female Data Power Combo Extension Cable 20 inches (50cm) sata cable
- SATA
- Black & Red
$6.99
0.00008322BTC
In stock
HANNORD
HANNORD 22-pin SATA male to female extension cable 12 inch
Combines 22-pin SATA data and power into a 12-inch male-to-female extension for backplane or internal-to-external drive connections
- TypeSATA
- ColorBlack & Red
- Length12 Inches
- Cable Length12 Inches
- Connector Number2
- Connector Detail1 x SATA to 1 x SATA
Cable Length 12 in.
- 12 in.
- 20 in.
- Combines data and power in a single 22-pin connector
- Extends internal SATA connections by 12 inches for drive flexibility
- Male-to-female design links drive directly to motherboard and power supply
- Suits backplane adapters and internal-to-external drive configurations
- 30 cm length fits tight chassis without excess cable clutter
22-pin SATA combo extension cable
This 22-pin SATA male-to-female cable carries both data and power in a single run. It suits builders who need to bridge a short gap between a drive and the motherboard or backplane without running two separate leads. The 12-inch length adds reach inside compact chassis or external enclosures. Both ends use the combined 7+15-pin layout so the drive receives signal and supply from one connector.
Single-cable data and power routing
The cable merges the standard 7-pin data path and 15-pin power path into one 22-pin interface at each end. This reduces clutter when connecting hot-swap bays, backplane adapters or external drive docks that expect the combined connector. Installers can route a single cable instead of managing separate data and power runs through tight openings. The male end plugs into the drive or backplane while the female end accepts the host-side data and power cables.
Clearance and connector orientation check
Verify that the 12-inch span covers the distance between your drive bay and the motherboard or backplane ports. Confirm the host side provides both a 7-pin SATA data header and a 15-pin SATA power plug to mate with the female connector. Ensure the drive or backplane uses the 22-pin 7+15 layout rather than separate connectors. Note that manual measurement may vary slightly so allow a small margin when planning the cable route.
Highlights
- Combines data and power in a single 22-pin connector
- Extends internal SATA connections by 12 inches for drive flexibility
- Male-to-female design links drive directly to motherboard and power supply
- Suits backplane adapters and internal-to-external drive configurations
- 30 cm length fits tight chassis without excess cable clutter
Specifications
| Type | SATA |
|---|---|
| Color | Black & Red |
| Length | 12 Inches |
| Cable Length | 12 Inches |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Male to Female |
| Specifications | SATA 22Pin Male to Female |
Other versions of this model
1 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
Will the 22-pin SATA connectors need replacement after frequent drive swaps?
The 22-pin male and female connectors are built for repeated mating cycles typical of drive swaps; no scheduled replacement is required unless physical damage occurs.
What limits the cable length when running a drive continuously?
The fixed 12-inch (30 cm) length is the limiting factor; signal and power integrity are maintained within this distance.
Does the combined data and power cable generate extra heat during all-day operation?
The cable carries standard SATA current levels and does not produce measurable heat beyond the drive and motherboard connectors themselves.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114286BTC
In stock
