We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld wall scanner with LCD screen and rubberised back

HANMATEK Stud Finder Wall Scanner 6 in 1 Upgrade

SKU CH-H1XN-PD7XB

Detects studs, wires, pipes and metals up to 38 mm deep with six modes, auto-calibration and an LCD showing depth, signal and battery

  • Includestrue
  • Standards/CertificationsFDA Class VI Seats
  • Detect studs precisely with exact mode to .8 inch depth
  • Scan deeper structures using deep mode reaching 1.5 inches
  • Locate live AC wires safely up to 1.50 inches behind walls
  • Identify metal types with separate ferrous and non-ferrous modes
  • Read results clearly on HD LCD showing depth, signal strength and center point

Multi-mode wall scanner

The HANMATEK Stud Finder Wall Scanner is a 6 in 1 detector designed for DIY renovators, electricians and carpenters who need to locate studs, pipes and live wiring behind drywall, plaster or ceiling surfaces before drilling or cutting. It combines six scanning functions in one handheld unit so users can switch between exact and deep modes depending on wall thickness and target material.

LCD readout with audio and visual alerts

A backlit HD LCD shows scan mode, signal strength, depth indication and battery status at a glance, while three colour LEDs and an audible alarm (switchable) confirm edge and centre detection without constantly watching the screen. The rubberised rear face protects finished walls during prolonged sliding scans and the ergonomic grip suits left- or right-handed use at any angle.

Check wall composition and calibration space

Before ordering, verify that the surface is free of metal mesh, dense rebar grids or foil-backed insulation that can mask or distort readings beyond the stated detection depths. Auto-calibration requires a clear start area with no nails, live AC wires or metal objects present, so ensure a clean section of wall is available for the initial calibration press.

Highlights

  • Detect studs precisely with exact mode to .8 inch depth
  • Scan deeper structures using deep mode reaching 1.5 inches
  • Locate live AC wires safely up to 1.50 inches behind walls
  • Identify metal types with separate ferrous and non-ferrous modes
  • Read results clearly on HD LCD showing depth, signal strength and center point

Specifications

Includestrue
Standards/CertificationsFDA Class VI Seats

Questions about this item

What scanning depth does the exact mode reach for wooden studs?

The exact stud scan mode detects wooden studs up to 0.8 inch (20 mm) deep behind the wall surface.

What physical preparation does the device need before a scan?

Auto-calibration must be performed on a clear area free of nails, AC wires or metal objects, otherwise the results will be inaccurate.

How do I start a scan and what indicates the centre of a stud?

Press the metal detection button to auto-calibrate, then move the unit along the wall; a red backlight and audible alarm signal the stud centre.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.