Hammer Anvil Value Series XLR Male to Right Angle Female Microphone Cable 25 ft

Professional XLR cable for studio and stage use

The Hammer Anvil Value Series cable links a microphone to a mixer, preamp or audio interface using a standard male XLR plug on one end and a right-angle female XLR on the other. Its 25-foot length gives plenty of reach for larger studio layouts or live-stage runs. The soft polymer jacket stays flexible and quiet when the cable is moved during a session.

Right-angle female connector for tight spaces

The right-angle XLR female end is the single feature that decides fit: it lets the cable sit flush against equipment racks, stage boxes or crowded pedalboards where a straight connector would protrude and risk damage. If your gear has recessed XLR inputs or limited rear clearance, this angle solves the clearance problem; if all your connections are open and straight, a conventional straight-to-straight cable will work just as well.

Plug-and-play installation with strain relief

Both connectors are pre-wired and keyed, so installation is a matter of pushing each plug in until the latch clicks. The moulded strain relief at each end protects the solder joints from tugging. The only common issue is forgetting to engage the latch fully, which can cause intermittent signal or a loose connection during a performance.