Hakko
Hakko T22-D52 Chisel Soldering Tip 5.2 mm
A 5.2 mm chisel tip for T22-series handpieces, rated to 840 °F for heavy-duty soldering
- TypeChisel
- Heavy-duty chisel tip handles high-heat joints up to 840 °F
- 2 mm width and 0.7 mm thickness deposit solder quickly across wide pads
- T22 series fits Hakko FM-2030 and FM-2031 handpieces without adapters
- Composite material resists oxidation for longer tip life
- 8 mm tip length reaches into tight assemblies while keeping heat focused
Hakko T22-D52 Chisel Tip 5.2 mm
The Hakko T22-D52 is a chisel-style soldering tip with a 5.2 mm width and 8 mm length. It suits technicians who need a heavy-duty tip for general soldering tasks. The composite material tip works with Hakko FM-2030 and FM-2031 handpieces. Buyers needing finer precision tips should look elsewhere.
Sustained load at 840 °F maximum
The tip withstands a maximum operating temperature of 840 Degrees F for prolonged work. Its 0.7 mm thickness provides thermal mass that resists temperature drop during continuous joints. The T22 series design maintains stable heat transfer across the 5.2 mm chisel face. Users requiring higher temperature ratings must choose a different series.
Direct fit for FM-2030 and FM-2031
Installation is a simple push-fit into compatible Hakko handpieces. The 5.2 mm outside diameter matches the FM-2030 and FM-2031 barrels exactly. Problems arise when the tip is forced into non-listed handpieces or when the set screw is overtightened. Always verify the handpiece model before fitting.
Highlights
- Heavy-duty chisel tip handles high-heat joints up to 840 °F
- 2 mm width and 0.7 mm thickness deposit solder quickly across wide pads
- T22 series fits Hakko FM-2030 and FM-2031 handpieces without adapters
- Composite material resists oxidation for longer tip life
- 8 mm tip length reaches into tight assemblies while keeping heat focused
Specifications
| Brand | Hakko |
|---|---|
| Type | Chisel |
Questions about this item
How hot does the T22-D52 chisel tip get during continuous use?
The tip reaches a maximum operating temperature of 840 Degrees F.
Which Hakko handpieces must I already own to use this T22-D52 tip?
It is compatible with Hakko handpiece model numbers FM-2030 and FM-2031.
Will this 5.2 mm chisel tip fit my older Hakko T22 series handpiece?
Yes, it belongs to the T22 tip series and fits handpieces designed for that series.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Electronix Express
Electronix Express Electronic Safe 12.2 x 7.87 x 7.87 in 10.9 lb
- Security Safes
$41.99
0.00048411BTC
In stock
