We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 100x100mm neutral density glass filter with dark tinted multi-coated surface

Haida

Haida NanoPro MC 100x100mm Neutral Density 32000x (4.5) camera filter

SKU CH-27WW-HJBS8

A 100x100mm neutral density filter with a 15-stop density of 4.5 and 32000x factor, multi-coated to reduce reflections and resist scratches and smudges

  • 15-stop density enables ultra-long exposures for motion blur
  • 32000x light reduction allows wide apertures in bright conditions
  • Nano multicoating repels dirt and smudges for easier cleaning
  • Multi-coated glass minimises reflections and flare for higher contrast
  • Scratch-resistant construction protects the filter surface during field use

Haida NanoPro MC 100x100mm ND Filter

The Haida NanoPro MC 100x100mm Neutral Density 32000x (4.5) filter is a square glass filter measuring 100 x 100mm. It provides a 15-stop light reduction for photographers who need extended exposure control. The multi-coated NanoPro glass resists scratches, dirt and smudges during regular handling. It suits landscape and creative photographers using compatible filter holders.

Practical limits of 15-stop density

A 15-stop reduction cuts light by a factor of 32000, requiring very long shutter speeds or wide apertures in normal daylight. Autofocus and optical viewfinders may become unusably dark, so composition and focus must be set before mounting the filter. Colour neutrality holds across the glass, but extreme density can amplify any minimal colour cast in post-processing. Very bright scenes may still exceed the practical range for motion-blur effects.

Installation and common issues

The filter slides into a standard 100mm filter holder system; no threading is required on the lens itself. Ensure the holder is seated squarely to prevent light leaks around the edges. Clean the NanoPro coating only with a microfibre cloth and approved solution to avoid damaging the multi-layer surface. Forgetting to remove other filters first often causes vignetting on wide-angle lenses.

Highlights

  • 15-stop density enables ultra-long exposures for motion blur
  • 32000x light reduction allows wide apertures in bright conditions
  • Nano multicoating repels dirt and smudges for easier cleaning
  • Multi-coated glass minimises reflections and flare for higher contrast
  • Scratch-resistant construction protects the filter surface during field use

Specifications

No published specifications for this item yet.

Questions about this item

Which density should I choose for this 100x100mm filter?

This filter has a fixed density of 4.5 (15 stop) and a 32000x factor; there are no alternative versions listed for this model.

What does the 32000x factor mean when I shoot with it?

It cuts light by 15 stops, letting you use much longer exposures or wider apertures for motion blur or shallow depth of field in bright conditions.

What filter system does the 100x100mm size fit?

The 100x100mm rectangular glass fits standard 100mm filter holders used with rectangular lens systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.