We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten 15 cm RP-SMA to IPEX4 coaxial cables, AWG32, 50 Ohm, 6.0 GHz

H-2 Technik

H-2 Technik coaxial rf cable 10-pack 15cm RP-SMA to IPEX4 50Ohm 6.0GHz AWG32

SKU CH-9RY1-BDAZE

Ten 15 cm RP-SMA to IPEX4 coaxial cables, 50 Ohm impedance, AWG32, rated to 6.0 GHz

  • ConductorCopper Conductor
  • Ten cables in one pack simplify multi-antenna builds
  • 15 cm length keeps internal routing tidy and short
  • RP-SMA to IPEX4 connectors fit common wireless modules directly
  • 50 Ohm impedance matches RF circuits for clean signal transfer
  • Rated to 6.0 GHz covers Wi-Fi, Bluetooth and Zigbee bands

Ten-Pack Coaxial Pigtails

The H-2 Technik bundle contains ten coaxial RF pigtails, each 15 cm long. They terminate in RP-SMA male on one end and IPEX4 on the other. The 50 Ohm impedance and AWG32 copper conductors support frequencies up to 6.0 GHz. This pack suits installers who need multiple identical jumpers for wireless modules.

Suited for multi-card wireless builds

Builders fitting several mini-PCIe or M.2 wireless cards into one chassis will appreciate the quantity and the short length. Users who require longer runs, different connector types or a single cable should look elsewhere. The fixed 15 cm reach limits placement to adjacent board and antenna positions.

Fits tight wireless-module installs

The pigtail bridges the card’s IPEX4 port to an external RP-SMA antenna bulkhead. Its slender AWG32 profile routes easily around crowded motherboards and small-form-factor cases. No extra adapters are needed when the antenna side already presents RP-SMA female threads.

Highlights

  • Ten cables in one pack simplify multi-antenna builds
  • 15 cm length keeps internal routing tidy and short
  • RP-SMA to IPEX4 connectors fit common wireless modules directly
  • 50 Ohm impedance matches RF circuits for clean signal transfer
  • Rated to 6.0 GHz covers Wi-Fi, Bluetooth and Zigbee bands

Specifications

ConductorCopper Conductor

Questions about this item

What antenna or wireless module must I already have to use the RP-SMA male connectors on these cables?

You need an antenna or device with an RP-SMA female jack; the ten cables each have an RP-SMA male plug on one end.

Will the IPEX4 ends mate with the U.FL connectors on my existing mini-PCIe wireless card?

Yes, the IPEX4 connector is mechanically compatible with the U.FL / IPEX1 receptacles found on most mini-PCIe and M.2 wireless modules.

How can I confirm each 15 cm pigtail is delivering a clean 50 Ohm path up to 6.0 GHz after installation?

Use a vector network analyser or calibrated TDR to verify return loss and insertion loss across the DC to 6000 MHz range on every cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.