We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized metal washing machine outlet box with two valves and threaded drain fitting

Guy Gray

Guy Gray 82026 Washing Machine Outlet Box Galvanized 1/2" MIP equipment

SKU CH-G07G-TCVY4

Galvanised washing-machine outlet box with 1/2" MIP inlet, centre drain and two valves included

  • Weight5.7
  • Galvanized metal construction resists corrosion in wet laundry areas
  • 1/2 inch MIP inlet and valve connections fit standard supply lines
  • 50 inch box depth allows installation in shallow wall cavities
  • 63 inch width provides ample space for hose connections
  • Includes threaded drain fitting, locknut, two valves and O-ring for complete setup

Galvanized Washing Machine Outlet Box

The Guy Gray 82026 provides a galvanized metal outlet box for washing machine installations. It measures 11.63 inches wide, 9.50 inches high and 3.50 inches deep with a matching faceplate. Two 1/2 inch MIP valves and a threaded drain fitting with locknut are included for supply and drainage connections.

Ideal for Standard Laundry Rough-Ins

This unit suits plumbers and contractors running 1/2 inch MIP supply lines to a single washer location. The center drain position and integrated valves streamline rough-in work. Installers needing a duplex receptacle, alternative valve types or a different drain offset should look at other configurations.

1/2 Inch MIP Valve Connection Decides Fit

The defining specification is the 1/2 inch MIP valve connection for both hot and cold inlets. Your supply piping must match this thread size and type to install the box without adapters. Verify the 11.63 by 9.50 inch rough-in opening matches your wall cavity before purchase.

Highlights

  • Galvanized metal construction resists corrosion in wet laundry areas
  • 1/2 inch MIP inlet and valve connections fit standard supply lines
  • 50 inch box depth allows installation in shallow wall cavities
  • 63 inch width provides ample space for hose connections
  • Includes threaded drain fitting, locknut, two valves and O-ring for complete setup

Specifications

Weight5.7
BrandGUY GRAY

Questions about this item

What does the 1/2" MIP inlet connection on the Guy Gray 82026 washing machine outlet box limit in practice?

The 1/2" MIP inlet caps the supply line size to half-inch male iron pipe threads, so larger supply lines cannot connect directly without an adapter.

What are the exact box dimensions and faceplate measurements needed to fit the Guy Gray 82026 in a wall cavity?

The box measures 11.63 in. wide, 9.50 in. high and 3.50 in. deep; the faceplate is 11.62 in. wide by 9.50 in. high.

How is the Guy Gray 82026 installed, and which step is commonly missed?

Secure the galvanized metal box in the opening, thread the supplied drain fitting with its locknut, connect the two 1/2" MIP valves, and seat the included O-ring — skipping the O-ring causes leaks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.