Guardair
Guardair Air Gun Chrome 120 psi 34 In. 7.1 lbf
Chrome air gun with 34 in. reach, 120 psi rating, Venturi nozzle boosting flow to 130 scfm and 7.1 lbf force while meeting OSHA 1910.242
- Safer operation with dead-man trigger that stops airflow when released
- OSHA 1910.242 compliance keeps inlet pressure within regulated limits
- 1 lbf output at 120 psi delivers strong cleaning force
- Venturi nozzle draws ambient air to boost volume at the tip
- Adjustable auxiliary handle enables two-handed control for extended use
Guardair Chrome Air Gun 34 In.
The Guardair chrome air gun is a heavy-duty pneumatic cleaning tool built for industrial and automotive maintenance. Its pistol-grip aluminium body and 34-inch overall length give operators extended reach without ladders.
Installation uses 3/4 In. F NPT inlet
Connect the 3/4-inch female NPT inlet to a regulated air supply not exceeding 120 psi. The 1/2-inch female NPT outlet accepts the supplied 24-inch venturi extension. Common issues include over-pressure above 120 psi and loose NPT threads causing leaks.
Suits high-volume cleaning at 130 scfm
This gun suits technicians who need 7.1 lbf blow-off force and OSHA 1910.242 compliance at 121 dBA. It is not for low-consumption shops limited to under 130 scfm or for tasks requiring a shorter, lighter tool.
Highlights
- Safer operation with dead-man trigger that stops airflow when released
- OSHA 1910.242 compliance keeps inlet pressure within regulated limits
- 1 lbf output at 120 psi delivers strong cleaning force
- Venturi nozzle draws ambient air to boost volume at the tip
- Adjustable auxiliary handle enables two-handed control for extended use
Specifications
| Brand | Guardair |
|---|
Questions about this item
How do I confirm the air gun is performing to spec after connecting it to my compressor?
Verify the compressor delivers 120 psi at the 3/4 in. (F)NPT inlet and listen for the 121 dBA maximum noise level during operation.
What accessories are included and which fittings must I purchase separately?
The gun ships with a 24 in. extension and Venturi nozzle; you must supply a 3/4 in. (F)NPT inlet fitting and a 1/2 in. (F)NPT outlet fitting for your hose.
Should I choose the standard 1/2 in. nozzle or the Venturi 3/4 in. nozzle for heavy cleaning?
Select the Venturi nozzle with 3/4 in. (F)NPT outlet — it draws ambient air to boost volume at the tip and meets OSHA 1910.242 at 120 psi.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
