GSM Outdoors
GSM Outdoors Starlink Gen 3 Mounting Kit 35" J-Pole 2 in 1 Accessories
A 35-inch J-pole mounting kit with pipe adapter for Starlink Gen 3 dishes, offering 360-degree rotation and up to 20-degree tilt on 1-to-2-inch poles
- Designed for Starlink Gen 3 Standard 4 X Dish ensuring secure fit
- Heavy-duty 1.5 mm steel pole and 2.0 mm bracket withstand wind and rain
- Pipe adapter fits 1" to 2" poles with V-jam brackets and U-bolt clamp
- 360 rotation and up to 20 tilt allow precise alignment for optimal signal
- Reversible 35" J-pole with 1-1/2" outer diameter offers flexible wall standoff adjustment
Starlink Gen 3 Dish Compatibility
This mounting kit is designed specifically for the Starlink Gen 3 Standard 4 X Dish. It provides a secure attachment point and includes a pipe adapter that enables 360 rotation with up to 20 tilt adjustment. The hardware suits installers who need reliable signal alignment for the Gen 3 dish on a fixed structure. The kit is sold new and ready for outdoor deployment.
Ideal for Rural Roof or Wall Mounts
The 35" J-pole mast and reversible design suit roof, eave or wall installations where a sturdy standoff is required. Builders working with poles between 1" and 2" diameter will find the V-jam brackets and U-bolt clamp effective at reducing vibration. This kit does not suit users who need a non-penetrating roof mount, a ground-based tripod or a mast taller than 35 inches.
Check Pole Diameter and Mounting Surface
Before ordering, verify that your existing pole or pipe falls within the 1" to 2" diameter range accepted by the pipe adapter. Confirm the wall, eave or roof structure can support the 1.5mm steel pole and 2.0mm bracket assembly. Ensure you have tools to tighten the reinforced U-bolt clamp and set the desired tilt angle up to 20 degrees.
Highlights
- Designed for Starlink Gen 3 Standard 4 X Dish ensuring secure fit
- Heavy-duty 1.5 mm steel pole and 2.0 mm bracket withstand wind and rain
- Pipe adapter fits 1" to 2" poles with V-jam brackets and U-bolt clamp
- 360 rotation and up to 20 tilt allow precise alignment for optimal signal
- Reversible 35" J-pole with 1-1/2" outer diameter offers flexible wall standoff adjustment
Specifications
No published specifications for this item yet.
Questions about this item
What Starlink dish is required for this mounting kit?
It is built for the Starlink Gen 3 Standard 4 X Dish and includes a pipe adapter that provides 360 rotation and up to 20 tilt for alignment.
Can I attach this kit to an existing mast I already have?
The pipe adapter fits poles from 1" to 2" in diameter and uses V-jam brackets with a reinforced U-bolt clamp to secure the dish.
How do I verify the mount is stable after installation?
The 1.5 mm steel pole, 2.0 mm bracket and aluminum alloy components are designed to withstand wind and rain while minimising vibration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
