GSM Outdoors
GSM Outdoors PANMILED 8pcs Led Backlight Strips Samsung 43 TV UN43J5200 UN43J5000 2 in 1 accessory
Eight 32.7 in LED strips with 7 beads each replace the backlight on 43 in Samsung UN43J5200 and UN43J5000 TVs
- Eight LED strips restore screen brightness on compatible Samsung 43 TVs
- 7 inch combined length matches original backlight dimensions exactly
- Each strip carries seven 3V beads for even illumination
- Pre-applied double-sided adhesive speeds up installation inside the panel
- Designed for UN43J5200 and UN43J5000 series 2015 models
43-inch Samsung LED Backlight Kit
This kit contains eight LED strips designed for 43-inch Samsung TVs including the UN43J5200 and UN43J5000 series. Each set provides four right and four left strips measuring 32.7 inches combined length with seven 3-volt beads per strip. It suits repair technicians or owners fixing uneven backlighting on compatible panels.
Pre-cut Strips with Adhesive Backing
The strips arrive pre-cut to the stated length and include double-sided adhesive paper on the rear surface. This eliminates the need to measure or cut raw LED tape during the repair. Matching the physical layout to the photo supplied with the listing is the only verification step before installation.
Direct Replacement Requires Panel Access
Installation involves opening the TV chassis to reach the original backlight array, so basic disassembly tools and anti-static precautions are necessary. The most common issue is ordering the wrong variant; the strips must match the exact arrangement shown in the product image. No soldering is required if the existing connectors align with the replacement strips.
Highlights
- Eight LED strips restore screen brightness on compatible Samsung 43 TVs
- 7 inch combined length matches original backlight dimensions exactly
- Each strip carries seven 3V beads for even illumination
- Pre-applied double-sided adhesive speeds up installation inside the panel
- Designed for UN43J5200 and UN43J5000 series 2015 models
Specifications
No published specifications for this item yet.
Questions about this item
How often will the adhesive on the 32.7 in strips need replacement if the TV stays on all day?
The double-sided adhesive paper on the back is designed for a single installation; if a strip ever loosens you would replace that strip rather than re-use the original tape.
Which component limits continuous operation first — the LED beads or the adhesive?
Each LED bead runs at 3 V and there are seven beads per strip, so the beads themselves set the thermal and electrical limit long before the adhesive would fail.
What heat or power change should I expect when all eight strips run 24/7?
Eight strips with seven 3 V beads each draw a modest, steady current; the assembly warms slightly but stays within normal TV backlight operating temperatures.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
