GSM Outdoors
GSM Outdoors Audiozee Havoc Series 10" Subwoofer 1600W RMS 3200W Max 2 in 1 accessory
A 10-inch car subwoofer delivering 1600W RMS and 3200W max power with a Kevlar-reinforced cone, triple 240oz ferrite motor and 3-inch 4-layer copper voice coil rated to 390F
- Deep, powerful bass you can feel
- 1600W RMS and 3200W max power handling
- Kevlar-reinforced cone delivers clean, distortion-free sound at extreme volume
- 3-inch 4-layer copper voice coil rated to 390°F for extended sessions without overheating
- Triple 240oz ferrite motor provides tight cone control for louder, deeper output per watt
Havoc Series 10" Subwoofer Overview
The Audiozee Havoc Series 10" subwoofer delivers 1600W RMS and 3200W max power for car audio enthusiasts, daily drivers, and SPL competition builds. Its Kevlar-reinforced cone provides lightweight rigidity for cleaner, distortion-free sound at extreme volumes. A competition-grade motor design offers tight cone control and precision to maximise output per watt. The unit is sold new as a 2-in-1 accessory.
Upgrade Path and Fitment
This subwoofer replaces factory or entry-level drivers that cannot handle high excursion or sustained power. The jump is worth it when your enclosure demands dual 4-ohm impedance flexibility and a motor structure built for SPL-level output. It fits sealed or ported enclosures and is available in 10, 12, and 15-inch sizes with dual 2 or dual 4 impedance options. Buyers needing a different impedance or cone material not listed here should look elsewhere.
Sustained Load Behaviour
A 3-inch 4-layer copper voice coil rated to 390F (200C) allows extended playtime without overheating during long bass sessions. Triple 240oz ferrite motors maintain tight cone control and precision under continuous high-power demand. The design is engineered for high excursion and reliability under sustained load rather than short bursts. Installations requiring active cooling or thermal protection beyond the coil rating are not supported.
Highlights
- Deep, powerful bass you can feel
- 1600W RMS and 3200W max power handling
- Kevlar-reinforced cone delivers clean, distortion-free sound at extreme volume
- 3-inch 4-layer copper voice coil rated to 390°F for extended sessions without overheating
- Triple 240oz ferrite motor provides tight cone control for louder, deeper output per watt
Specifications
No published specifications for this item yet.
Questions about this item
What enclosure volume and depth does the 10-inch Havoc subwoofer require?
The 10-inch model works in sealed or ported boxes; choose an enclosure built to the manufacturer's volume spec for this driver and verify the mounting depth clears the triple 240oz ferrite motor.
How do I wire the dual 4-ohm voice coils, and what mistake causes low output?
Wire the coils in parallel for a 2-ohm load or in series for 8 ohms to match your amplifier; the common error is leaving one coil disconnected, which halves power handling and unbalances the motor.
When should I inspect the 3-inch copper voice coil and Kevlar cone for wear?
Check the coil leads and cone surround after every few high-output sessions; the coil is rated to 390F (200C), so discoloration or a rubbing noise means the assembly needs service.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
