We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A compact white rectangular network injector with two Ethernet ports and a power cable

GSM Outdoors

GSM Outdoors 90W Gigabit PoE++ Injector 2 in 1 accessory

SKU CH-NME3-F1GXN

Delivers up to 90W over Gigabit Ethernet to 100 metres with built-in AC power and plug-and-play setup

  • Gigabit Ethernet output delivers 1000Mbps data rates for fast network performance
  • Single-port 90W PoE++ output powers devices at 52-57V DC
  • Backward compatible with 802.3af 15.4W and 802.3at 30W standards
  • Built-in AC/DC converter enables plug-and-play setup with LED status indicator
  • Extends power and data up to 100 metres over one Ethernet cable

90W Gigabit PoE++ Injector

The GSM Outdoors injector supplies up to 90W at 52-57V DC over a single Gigabit Ethernet port. It is built for installers who need to power 802.3bt-class devices such as PTZ cameras or wireless access points without running separate mains cables. The unit accepts a standard AC supply and converts it internally, so no external power brick is required. It is new and ready for immediate deployment.

Built-in AC/DC converter and LED status

The integrated converter removes the need for a separate adapter, reducing cable count at the installation point. LED indicator lights show real-time operating status, letting technicians confirm power delivery at a glance. Plug-and-play operation means no software configuration is needed before the link comes up. The single output port delivers both data and power over one Ethernet cable.

100 metre reach and 1000Mbps limit

Power and data travel together up to 100 metres (328 ft) over Cat5e or better cabling, matching the Ethernet channel limit. The Gigabit port caps throughput at 1000Mbps, so multi-gigabit uplinks cannot be used. Backward compatibility covers 802.3af (15.4W) and 802.3at (30W) devices, but equipment needing more than 90W or a second powered port is not supported.

Highlights

  • Gigabit Ethernet output delivers 1000Mbps data rates for fast network performance
  • Single-port 90W PoE++ output powers devices at 52-57V DC
  • Backward compatible with 802.3af 15.4W and 802.3at 30W standards
  • Built-in AC/DC converter enables plug-and-play setup with LED status indicator
  • Extends power and data up to 100 metres over one Ethernet cable

Specifications

No published specifications for this item yet.

Questions about this item

Does the 90W PoE++ injector have any user-serviceable parts or internal fuses that need periodic replacement?

The unit is a sealed plug-and-play adapter with a built-in AC/DC converter and no user-serviceable components; the 24-month warranty covers the entire injector.

What thermal or current limit kicks in first when the injector runs continuously at the full 90W (52-57V DC) output?

The injector is IEEE 802.3af/at/bt compliant and delivers up to 90W per port; built-in protection circuits limit output if the connected device draws more than the negotiated class allows.

How much heat and fan noise does the 90W injector produce when it powers a device 24/7 over a 100 m cable run?

The adapter has no fan and relies on passive cooling; the LED power indicator shows operating status while the built-in AC/DC converter handles continuous loads silently.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.