GSM Outdoors
GSM Outdoors 2 in 1 Accessory Starlink Gen 2 Cable 200FT 60M 24AWG 1200Mbps
A 200 ft, 24 AWG extension cable with welded RJ45 connectors for Starlink Gen 2 rectangular dishes, rated for 1200 Mbps and all-weather use
- Lightning-fast 1200Mbps speeds via 24AWG copper core
- Welded connectors on both ends boost conductivity
- 50% resistance reduction with latest RJ45 connectors
- Water-resistant PVC shell withstands harsh weather
- 200FT length extends Starlink Gen 2 reach
Starlink Gen 2 replacement cable
This 200 ft extension cable is built for Starlink Gen 2 rectangular satellite kits. It ships with welded RJ45 connectors on both ends so the link stays secure from the dish to the router. The 24 AWG copper conductors support up to 1200 Mbps throughput for streaming, gaming and video calls. Buyers who need a shorter run or a different connector type should look elsewhere.
Build integration and routing
The grey PVC jacket is water-resistant and flexible, letting the cable survive outdoor exposure across seasons. At 60 metres it clears long roof-to-router paths without extra joiners. The welded ends improve waterproofing at each termination point. Installers who require conduit-rated or plenum-rated jacket material cannot use this cable.
Sustained outdoor performance
The supplier states resistance is reduced by 50 percent compared with standard RJ45 cables, which helps maintain the 1200 Mbps rating over the full length. The ageing-resistant PVC shell resists cracking in heat and stays pliable in cold. Users who expect continuous gigabit throughput in extreme temperatures should verify real-world throughput after installation.
Highlights
- Lightning-fast 1200Mbps speeds via 24AWG copper core
- Welded connectors on both ends boost conductivity
- 50% resistance reduction with latest RJ45 connectors
- Water-resistant PVC shell withstands harsh weather
- 200FT length extends Starlink Gen 2 reach
Specifications
No published specifications for this item yet.
Questions about this item
What data-rate ceiling appears first when this 24AWG copper cable runs at full 1200Mbps for long periods?
The 24AWG copper core and RJ45 connectors are rated for up to 1200Mbps, so the cable's own bandwidth limit is the first ceiling you reach under sustained load.
How much warmer or louder does the 200FT run get after a full day of continuous traffic?
As a passive copper cable it generates no noise and negligible heat; the PVC jacket stays at ambient temperature even during 24-hour operation.
Which Starlink hardware must already be installed for this Gen 2 replacement cable to connect?
It plugs directly into a Starlink Gen 2 rectangular satellite dish and the matching router, both using the welded RJ45 ends on the 60M length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
