We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

GSM Outdoors

GSM Outdoors 2 in 1 accessory (Grey)

SKU CH-951W-XYP2W

A portable USB DAC and headphone amplifier with dual 3.5 mm and 4.4 mm balanced outputs, dual CS43131 chips, DSD256 and PCM 32-bit/384 kHz support, and 500 mW power into 160 ohms

  • Hi-res audio with DSD256 and PCM 32-bit/384 kHz support
  • Dual headphone outputs: 3.5 mm and 4.4 mm balanced jacks
  • Dual Cirrus Logic CS43131 DAC chips for pure sound
  • 500 mW output power at 160 ohms drives most headphones
  • Transparent aluminium case with side volume control

Portable USB DAC and headphone amplifier

The S.M.S.L D10 is a compact USB digital-to-analogue converter with an integrated headphone amplifier. It connects to a smartphone, PC or laptop and drives headphones through 3.5 mm single-ended and 4.4 mm balanced outputs. The unit targets listeners who want higher-resolution playback from portable devices.

Sustained audio performance

Dual Cirrus Logic CS43131 DAC chips handle PCM up to 32-bit/384 kHz and native DSD256 decoding. The amplifier delivers up to 500 mW into 160 ohms, providing clean output for extended listening sessions. A data status indicator confirms the active sampling rate during playback.

Simple connection and common issues

Plug the D10 into a USB port, attach headphones to either jack and adjust volume with the side button; no driver installation is required on most modern operating systems. The aluminium case with a transparent window exposes the circuitry, so care is needed to avoid physical damage to the visible chips. Some users find the 4.4 mm balanced connector less common than standard 3.5 mm plugs, requiring an adapter for certain headphones.

Highlights

  • Hi-res audio with DSD256 and PCM 32-bit/384 kHz support
  • Dual headphone outputs: 3.5 mm and 4.4 mm balanced jacks
  • Dual Cirrus Logic CS43131 DAC chips for pure sound
  • 500 mW output power at 160 ohms drives most headphones
  • Transparent aluminium case with side volume control

Specifications

No published specifications for this item yet.

Questions about this item

How much heat or noise does the S.M.S.L D10 produce when running all day?

The aluminium housing acts as a passive heatsink and the unit has no fan, so it runs silently and stays only slightly warm even after hours of continuous use.

What must I already own to use the 3.5 mm and 4.4 mm outputs on the D10?

You need a USB-C source such as a smartphone, tablet or laptop that supports USB audio, plus headphones or in-ear monitors with a 3.5 mm or 4.4 mm plug.

Will the D10 work properly alongside an older laptop that only has USB-A ports?

Yes, a USB-A to USB-C cable or adapter lets the older laptop send digital audio to the D10, which then handles all decoding via its dual CS43131 chips.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.