We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small rectangular copper SFP+ transceiver modules with RJ45 ports

GSM Outdoors

GSM Outdoors 2 in 1 Accessory 2 PCS 10GBASE-T SFP+ Transceiver

SKU CH-C16C-BNPPE

Two 10GBASE-T SFP+ copper modules connect switches via Cat6a, Cat7 or Cat8 cable up to 30 metres at 2.5, 5 or 10 Gb/s

  • Multi-rate 2.5Gb, 5Gb, 10Gb speeds for flexible network scaling
  • RJ45 copper module connects via Cat6a, Cat7, Cat8 cables up to 30 meters
  • Hot-pluggable SFP+ footprint enables plug-and-play installation without downtime
  • Broad compatibility with Cisco, Ubiquiti, Meraki, MikroTik, Netgear and other 10G SFP+ switches
  • Operates reliably from 0 to 70 °C with 3W power draw

Two 10GBASE-T SFP+ transceivers

This pack contains two copper SFP+ modules that convert a 10G SFP+ port to an RJ45 connection. Each transceiver supports 2.5, 5 and 10 Gb/s rates and does not operate at 1.25 Gb/s. Network engineers expanding multi-gigabit links in switches or routers use these to add copper uplinks without replacing the host equipment.

Hot-pluggable RJ45 modules with 30-metre reach

The compact RJ45 assembly accepts Cat6a, Cat7 or Cat8 cables up to 30 metres. Units draw 3 W from a single 3.3 V supply and are hot-pluggable for live insertion or removal. Operating temperature spans 0 to 70 degrees Celsius, and the housing becomes hot during use so direct contact should be avoided while powered.

Broad vendor compatibility for open SFP+ ports

Tested compatibility includes Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Meraki MA-SFP-10GB-T, MikroTik S+RJ10, TP-Link TL-SM5310-T, Netgear AXM765 and switches from D-Link, Supermicro, Zyxel and others that follow the open SFP+ standard. Buyers whose gear requires a locked or proprietary transceiver will need a different module.

Highlights

  • Multi-rate 2.5Gb, 5Gb, 10Gb speeds for flexible network scaling
  • RJ45 copper module connects via Cat6a, Cat7, Cat8 cables up to 30 meters
  • Hot-pluggable SFP+ footprint enables plug-and-play installation without downtime
  • Broad compatibility with Cisco, Ubiquiti, Meraki, MikroTik, Netgear and other 10G SFP+ switches
  • Operates reliably from 0 to 70 °C with 3W power draw

Specifications

No published specifications for this item yet.

Questions about this item

What maximum distance does the 10GBASE-T SFP+ transceiver support over Cat6a or Cat7 cable?

The module supports up to 30 metres over Cat6a, Cat7 or Cat8 copper cabling.

What SFP+ port and power supply does this transceiver require to fit and operate?

It uses a standard hot-pluggable SFP+ footprint and draws 3 W from a single 3.3 V supply.

Is the transceiver hot-pluggable, and what handling precaution applies during operation?

Yes, it is hot-pluggable; the housing reaches high temperature so do not touch it while powered.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.