GSM Outdoors
GSM Outdoors 144W Dual-Chip Peltier Cooler TEC1-12706 DC 12V Single Cooler 2 in 1 accessory
A dual-chip thermoelectric cooler runs on 12 V DC and delivers 144 W of solid-state refrigeration for DIY water-cooling projects
- DC 12V operation enables portable low-voltage cooling
- 144W dual-chip design delivers strong thermoelectric heat pumping
- TEC1-12706 semiconductor plate provides solid-state refrigeration
- Silent vibration-free running suits quiet workspaces and labs
- Compact 986046 mm form factor fits DIY water-cooling loops
144W Dual-Chip Peltier Cooler
The GSM Outdoors TEC1-12706 module is a dual-chip thermoelectric cooler rated at 144W with a DC 12V working voltage. It uses a semiconductor chilling plate to create a temperature difference without noise, vibration or refrigerant. The unit measures 986046MM and includes a US power plug compatible with 110v-220v input. It is sold as a single cooler or as a complete kit with pump, water block, power supply and tubing.
DIY Enthusiasts and Experimental Builders
This cooler suits hobbyists learning semiconductor refrigeration theory, researchers testing cooling equipment, or builders assembling custom water-cooling loops. It is not for buyers who need a silent PC component with a standard mounting bracket, nor for users who require a room air-conditioning substitute. The note explicitly states it cannot serve as an air conditioner for a room.
144W at DC 12V Power Rating
The 144W dual-chip power rating at 12V is the single figure that decides if this module fits your thermal load and power budget. Your power supply must deliver sufficient current at 12V to sustain the rated wattage. If your design calls for a lower or higher heat-pumping capacity, this specific TEC1-12706 unit will not match the requirement.
Highlights
- DC 12V operation enables portable low-voltage cooling
- 144W dual-chip design delivers strong thermoelectric heat pumping
- TEC1-12706 semiconductor plate provides solid-state refrigeration
- Silent vibration-free running suits quiet workspaces and labs
- Compact 986046 mm form factor fits DIY water-cooling loops
Specifications
No published specifications for this item yet.
Questions about this item
What are the physical dimensions of the single cooler module?
The cooler measures 986046 mm, which is 3.862 by 361.81 inches, so verify your chassis or water-block clearance before ordering.
How is the TEC1-12706 cooler powered and what wiring mistake should be avoided?
It requires a DC 12 V supply rated for 144 W; connect the power leads with correct polarity — reversing them will heat the cold side instead of cooling it.
What ongoing maintenance does the water-cooling loop require?
Check coolant level and inspect the pump, water pipes and radiator for leaks or algae every few months; top up or flush the loop when flow drops or temperatures rise.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
