GSM Outdoors
GSM Outdoors 12V to 24V 50A 1200W Waterproof IP67 2 in 1 Accessory
A waterproof IP67 DC-to-DC boost converter steps 12 V up to 24 V at 50 A with 95 % efficiency
- Converts 12V vehicle power to stable 24V 50A 1200W output
- 95% conversion efficiency via synchronous rectification reduces energy loss
- IP67 waterproof aluminium shell with epoxy potting withstands -30°C to 80°C
- Built-in smart chip protects against overload, overcurrent, overtemperature, short-circuit and overvoltage
- Compact 145mm x 137mm x 48mm design weighs 1800g for easy installation
12 V to 24 V Step-Up Converter
This IP67-rated boost converter steps a 12 V vehicle or solar input up to a steady 24 V at up to 50 A, delivering 1200 W from a compact aluminium module measuring 145 mm by 137 mm by 48 mm. It is built for installers who need reliable high-power DC-DC conversion in harsh mobile or marine environments. The epoxy-potted housing resists water, dust and shock while operating from -30 °C to 80 °C.
1200 W Capacity With 95 % Efficiency
Synchronous rectification keeps peak efficiency at 95 %, so the unit runs cool even when driving heavy loads such as truck radios, audio amplifiers, LED lighting arrays or monitoring systems. The 350 mV ripple and 2-second start delay provide clean power for sensitive electronics, though sustained loads above 50 A will trigger the built-in over-current protection and shut the converter down.
Replaces Bulky Isolated Transformers
The non-isolated design saves space and weight compared with traditional isolated units, making it a direct upgrade for 12 V systems that need 24 V outputs without the bulk. Buyers who require galvanic isolation between input and output, or who need input voltages other than 12 V, should look elsewhere because this module accepts only a 12 V source.
Highlights
- Converts 12V vehicle power to stable 24V 50A 1200W output
- 95% conversion efficiency via synchronous rectification reduces energy loss
- IP67 waterproof aluminium shell with epoxy potting withstands -30°C to 80°C
- Built-in smart chip protects against overload, overcurrent, overtemperature, short-circuit and overvoltage
- Compact 145mm x 137mm x 48mm design weighs 1800g for easy installation
Specifications
No published specifications for this item yet.
Questions about this item
Will this 12V-to-24V converter run alongside the existing 12V wiring in my truck without drawing more than the 50A output limit?
The unit accepts a 12V input and delivers up to 50A at 24V for a 1200W maximum, so any 12V circuit feeding it must be sized for the corresponding input current.
How can I confirm the module is operating correctly once installed?
After power-up, the 2-second start delay ends and the output should stabilise at 24V with ripple around 350mV while the aluminium shell stays within the -30°C to 80°C operating range.
What comes in the package and what extra items are needed for a typical vehicle install?
The box contains one 12V-to-24V boost converter measuring 145mm x 137mm x 48mm and weighing 1800g; you will need to supply suitable input and output cables, fuses and mounting hardware for your specific application.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
