GRZWAYS FSKGH-FM Inline Cord Switch 20A 110V 3.3FT 14AWG IP66
A waterproof inline switch with 3.3FT 14AWG cable and piggyback plug controls devices up to 20A at 110V
- TypeWall Mount
- Amps20
- Horsepower20
- Includesfalse
- Voltage110V
- StyleKill Switch
- Convenient on/off control without unplugging devices
- IP66 rated for dust and water resistance
- 3FT 14AWG cable handles up to 20A at 110V
- Piggyback 3-prong plug fits standard US outlets
- Red LED rocker shows power status clearly
Inline Power Switch 20A 110V
The GRZWAYS FSKGH-FM is an inline cord switch rated for 20 amps at 110 volts. It features a 3.3 foot 14AWG cable with a piggyback plug and a red LED rocker button for on/off control. The unit carries an IP66 rating for dust and water resistance.
Suits outdoor or workshop power control
This switch suits users who need a weather-resistant way to control devices up to 20A without unplugging them. It is not for buyers who require an IP67 or IP68 certified enclosure, nor for circuits exceeding 125 volts AC or 250 volts DC.
Sustained load at rated current
Under continuous 20 amp load the 14AWG conductors and sealed housing maintain stable operation without overheating. The IP66 seal prevents ingress during prolonged exposure to dust and water jets, keeping contact resistance consistent over time.
Highlights
- Convenient on/off control without unplugging devices
- IP66 rated for dust and water resistance
- 3FT 14AWG cable handles up to 20A at 110V
- Piggyback 3-prong plug fits standard US outlets
- Red LED rocker shows power status clearly
Specifications
| Type | Wall Mount |
|---|---|
| Amps | 20 |
| Horsepower | 20 |
| Includes | false |
| Voltage | 110V |
| Style | Kill Switch |
| IP Rating | IP66 |
| Brand | GRZWAYS |
| Features | Any device compatible with a standard US power outlet and up to 20A at 110-250V |
| Part Number | FSKGH-FM |
Questions about this item
What outlet and circuit do I need to plug this 20A inline switch into?
It requires a standard US 3-prong 110V outlet on a circuit rated for at least 20 amps, and the piggyback plug lets you keep the receptacle free for another device.
Can I keep using my older 14AWG extension cords with this switch rated for 20A?
The switch cable is 14AWG and rated 20A at 110-250V, so any 14AWG cord you add must also carry a 20A rating to avoid a bottleneck.
How do I confirm the IP66 seal is working after I mount it outdoors?
The red LED rocker illuminates when power flows; verify the gasket sits flush, the PG11 cable gland is tight, and no water enters the housing after rain.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
