We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grote 5212 square red LED box lamp with bracket mount, blunt-cut wires, left-hand side marker light

Grote

Grote G5212 Box Lamp LED Sidemarker LH Red machine shop hardware

SKU CH-5KHJ-CEYPX

LED stop light with side marker, bracket-mounted for permanent surface installation, draws 0.06 to 1.4 A through blunt-cut wires

  • LED stop lamp gives clear red signal
  • Left-hand mounting fits driver-side installation
  • Bracket surface mount enables permanent fit
  • Blunt-cut wires allow direct electrical connection
  • Low 0.06 to 1.4 A current draw

Grote G5212 LED Box Lamp

The Grote G5212 is a new LED box lamp with an integrated sidemarker designed for the left-hand side of a vehicle. It uses a square red lens and surface-mount bracket for permanent installation on trailers, trucks or machinery. The unit operates on a current range of .06 to 1.4 A and connects via blunt cut wires for direct wiring into the electrical system.

Left-hand stop-light applications

This lamp suits fleets and owner-operators needing a DOT-compliant stop, tail and turn light with a built-in sidemarker for the driver side. It is not for right-hand mounting positions, applications requiring a clear or amber lens, or installations that demand a recessed or grommet mount instead of the supplied surface bracket.

Current draw .06 to 1.4 A

The operating current spans .06 to 1.4 A, so the vehicle circuit and fuse must support that range without voltage drop. Verifying the amperage capacity of the specific wiring harness is the single check that confirms whether this lamp will function correctly on the intended equipment.

Highlights

  • LED stop lamp gives clear red signal
  • Left-hand mounting fits driver-side installation
  • Bracket surface mount enables permanent fit
  • Blunt-cut wires allow direct electrical connection
  • Low 0.06 to 1.4 A current draw

Specifications

BrandGROTE

Questions about this item

What mounting hardware do I need to install the G5212 bracket on my vehicle?

The G5212 uses a surface-mount bracket designed for permanent installation; you will need suitable bolts or screws and a flat mounting surface that matches the bracket footprint.

Will the G5212 LED lamp operate correctly on a 12 V system that previously ran incandescent stop lights?

Yes, the lamp draws .06 to 1.4 A and connects via blunt-cut wires, so it can be wired directly into a standard 12 V lighting circuit without a load resistor.

How can I verify the G5212 is functioning properly once it is wired and mounted?

Apply power and confirm the red square lens illuminates evenly as a stop light; the LED array should reach full brightness instantly with no flicker.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.