We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular amber LED clearance lamp with bracket mount

Grote

Grote G4603 Clearance Marker Lamp Rectangular Amber

SKU CH-5GRP-CRX95

Rectangular amber LED clearance marker lamp with bracket mount, 12 LEDs and FMVSS 108 compliance

  • LED clearance lamp meets FMVSS 108 and SAE P2 standards
  • Amber acrylic lens on polycarbonate housing resists impact and weather
  • Bracket mount with blunt-cut wires enables permanent installation
  • Twelve LEDs draw only 0.15 A for efficient operation
  • Manufacturer backs the lamp with a two-year warranty

Grote G4603 Rectangular Clearance Lamp

The Grote G4603 is a rectangular clearance marker lamp designed for vehicle visibility compliance. It uses LED lighting technology with an amber polycarbonate lens and houses twelve individual LEDs. The unit mounts via a bracket for permanent installation on trucks, trailers or heavy equipment.

Upgrade from Incandescent Marker Lights

This lamp replaces older incandescent clearance lights that draw more current and require frequent bulb changes. The LED array operates at 0.15 A, reducing electrical load on the vehicle system. The jump is worth it when a fleet needs longer service intervals and consistent light output over thousands of operating hours.

FMVSS 108 Compliant Light Output

The lamp meets FMVSS 108 standards and carries SAE lens code P2 for front and side clearance marking. Its acrylic lens and polycarbonate housing resist vibration and weather exposure in commercial duty cycles. It is not suited for applications requiring red rear marker lenses or dual-intensity stop and tail functions.

Highlights

  • LED clearance lamp meets FMVSS 108 and SAE P2 standards
  • Amber acrylic lens on polycarbonate housing resists impact and weather
  • Bracket mount with blunt-cut wires enables permanent installation
  • Twelve LEDs draw only 0.15 A for efficient operation
  • Manufacturer backs the lamp with a two-year warranty

Specifications

BrandGROTE

Questions about this item

Will the 4 in width fit my existing bracket holes?

The lamp is 4 in wide and 2 in high with a bracket mount; measure your hole pattern against those dimensions before ordering.

How do I connect the blunt cut wires without a plug?

Strip each wire, crimp or solder to your harness, then seal with heat-shrink; the common mistake is leaving bare conductors exposed to moisture.

When should I expect to replace the 12 LEDs?

The polycarbonate housing and acrylic lens are sealed; if moisture enters or output drops below legal levels, replace the entire unit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.