Grote
Grote 64291-4 Snow Plow Lights 40000/25000 lm PK2 machine shop hardware
Heated halogen snow-plow pair delivers 40,000 lm high beam and 25,000 lm low beam for vehicle classes 10 through 13 with IP67 polycarbonate housings and swivel surface mounts
- 40,000 lumen high beam output for maximum night visibility
- 25,000 lumen low beam reduces glare for oncoming traffic
- IP67 sealed housing resists water and dust ingress
- Heated lens prevents ice build-up in freezing conditions
- Swivel surface mount with 5-way Packard connector for quick installation
Grote 64291-4 Snow Plow Lights
The Grote 64291-4 kit supplies two rectangular halogen lamps built for Class 4 through 13 vehicles. Each unit delivers a 40000 lumen high beam and a 25000 lumen low beam for plowing and heavy-duty work. A polycarbonate housing rated IP67 resists water and debris in harsh conditions.
Halogen output and thermal load
Halogen bulbs convert most input power into heat, so the lamps run hot during extended use. The IP67 seal keeps moisture out but does not vent that heat, so the housing temperature rises steadily. A 5-way Packard connector carries the full current draw for both filaments without a separate ballast.
Surface swivel mount and wiring
The surface-mount swivel base bolts to flat panels and lets the installer aim each beam independently. The included 5-way Packard plug connects directly to the vehicle harness, freeing the builder from fabricating a custom pigtail. Universal left-right fitment means one kit covers either side of the plow.
Highlights
- 40,000 lumen high beam output for maximum night visibility
- 25,000 lumen low beam reduces glare for oncoming traffic
- IP67 sealed housing resists water and dust ingress
- Heated lens prevents ice build-up in freezing conditions
- Swivel surface mount with 5-way Packard connector for quick installation
Specifications
| Brand | GROTE |
|---|
Questions about this item
How do I wire the 5-way Packard connector when mounting the lights on a vehicle class 12 truck?
Connect the 5-way Packard plug to the vehicle's matching harness, then secure the swivel mount to a flat surface; the step often missed is tightening the swivel lock bolt after aiming so vibration does not shift the beam.
Which component will need replacement first after repeated winter use on a class 8 plow?
The two halogen bulbs inside the polycarbonate housing are the only serviceable parts; they typically fail before the IP67 seal or the swivel mechanism.
At what point does the 40000 lm high beam output drop during continuous operation in sub-zero conditions?
Halogen output declines as the filament ages and voltage sags under load; expect noticeable dimming once the bulbs approach their rated hour limit, which varies with duty cycle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



