We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Oval red LED stop turn tail lamp with clear lens and bracket mount

Grote

Grote 54762 STT LED Oval Lamp 6" W/O Int. Back-Up FM

SKU CH-AZDM-27J1Y

Oval LED stop/turn/tail lamp with surface-mount bracket and female-pin connector, drawing 0.13 to 0.17 A

  • LED stop/turn/tail combo in one oval lamp
  • Clear and red lens colours meet DOT signalling needs
  • Surface bracket mount simplifies vehicle installation
  • Female pin connector works with 66863, 66864, 66865 plugs
  • Low 0.13–0.17 A draw reduces electrical load

Grote 54762 STT LED Oval Lamp

This Grote 54762 is a stop, turn and tail combination light using LED technology. It suits commercial vehicle operators and fleet maintenance teams who need a durable oval lamp for surface mounting on trucks, trailers or equipment.

Replaces incandescent oval STT lamps

The LED design draws only 0.13 to 0.17 A, reducing electrical load compared with older incandescent units. The upgrade is worth it when you want lower current draw, longer service life and a clear lens with red output on a 6 1/2 in wide housing.

Check bracket mount and Female Pin connection

Verify that your existing bracket mounting points match the surface-mount style and that the wiring harness uses a Female Pin connector compatible with Grainger 411Z80, 411Z81, 411Z87 or manufacturer models 66863, 66864, 66865. This lamp has no integrated back-up function, so a separate reverse light is required if needed.

Highlights

  • LED stop/turn/tail combo in one oval lamp
  • Clear and red lens colours meet DOT signalling needs
  • Surface bracket mount simplifies vehicle installation
  • Female pin connector works with 66863, 66864, 66865 plugs
  • Low 0.13–0.17 A draw reduces electrical load

Specifications

BrandGROTE

Questions about this item

What clearance does the 6 1/2 in wide oval lamp need for surface bracket mounting?

The lamp measures 6 1/2 in wide, 2 1/4 in high and 11/16 in deep, so allow at least that footprint plus room for the bracket flange and wiring behind the mounting surface.

Which female pin connector matches the lamp's electrical connection for a correct install?

Use a connector that matches Grainger part numbers 411Z80, 411Z81 or 411Z87, or manufacturer model numbers 66863, 66864 or 66865; the common mistake is forcing an incompatible pin layout.

When should the LED stop/turn/tail lamp be replaced based on its current draw range?

The lamp draws 0.13 to 0.17 A; if measured current falls outside this range or any LED segment fails, replace the entire sealed unit as LEDs are not serviceable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.