We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Oval LED stop-turn-tail lamp with clear red lens and integrated back-up light

Grote

Grote 54702 STT Lamp 6" LED Oval with Integrated Back-Up AMP

SKU CH-JH0Y-JHJ9V

Oval LED stop, turn and tail lamp with integrated back-up light and AMP connector

  • LED stop/turn/tail with integrated back-up light
  • Draws 0.13 to 0.16 A for low power use
  • Oval clear/red lens with surface bracket mount
  • Pigtail connection matches 66863, 66864, 66865
  • Ships free on orders of 75 or more

Grote 54702 STT Lamp 6" LED Oval

The Grote 54702 is a stop, turn and tail combination lamp built with LED lighting technology. Its oval housing measures 2 1/4 in high, 6 1/2 in wide and 11/16 in deep. A clear red lens covers the diodes and the unit mounts via bracket or grommet for surface installation.

Replaces incandescent oval STT lamps

Swapping an older incandescent oval lamp for this LED unit cuts current draw to 0.13 to 0.16 A and removes filament breakage as a failure mode. The jump is worth it when a vehicle sees frequent vibration, long duty cycles or when maintenance access is difficult. Electrical connection uses a pigtail compatible with Grainger 411Z80, 411Z81, 411Z84 and manufacturer models 66863, 66864, 66865.

Suits fleets and heavy-duty trucks needing

The integrated back-up function and AMP connector simplify wiring on compatible trucks and trailers. Buyers who need a round lamp, a different lens colour or a lamp without the back-up circuit should look at other models.

Highlights

  • LED stop/turn/tail with integrated back-up light
  • Draws 0.13 to 0.16 A for low power use
  • Oval clear/red lens with surface bracket mount
  • Pigtail connection matches 66863, 66864, 66865
  • Ships free on orders of 75 or more

Specifications

BrandGROTE

Questions about this item

What bracket or grommet mounting options fit the 6 1/2 in oval housing?

The lamp mounts by bracket or grommet in a surface-mount style; both methods are compatible with the 6 1/2 in width and 11/16 in depth of the oval housing.

How is the pigtail wired to the vehicle harness, and which step is often missed?

Connect the pigtail to a compatible AMP connector such as Grainger 411Z80, 411Z81 or 411Z84 (models 66863, 66864, 66865); the step often missed is fully seating and locking the connector to prevent moisture ingress.

When should the LED stop/turn/tail and integrated back-up lamp be replaced?

Replace the unit if light output drops below legal minimums, if moisture enters the sealed lens, or if the pigtail or connector shows corrosion that affects the 0.13 to 0.16 A circuit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.