We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square red stop turn tail light with clear lens, surface mount studs

Grote

Grote 52902 Square Stop Turn Tail Light Red 5-3/4 in

SKU CH-M1P5-5NJZ8

Square stop, turn and tail light with incandescent bulbs, 5-3/4 in wide, stud-mount design

  • Combined stop, turn and tail functions in one unit
  • Incandescent lighting provides reliable illumination
  • Square red lens design for clear visibility
  • Stud mount enables secure surface installation
  • Draws 0.6 to 2.1 A for efficient power use

Grote 52902 Combination Light

The Grote 52902 is a square stop, turn and tail combination light with a clear red lens. It mounts on a stud for surface installation on trucks, trailers or heavy equipment. The incandescent unit draws between 0.6 and 2.1 A depending on function. This light suits fleets and owner-operators needing a direct replacement for existing square housings.

Sustained Operation

Under continuous use the incandescent filaments produce steady heat and a stable current draw within the 0.6 to 2.1 A range. Output does not dim as the lens warms, so brake and turn signals remain visible during long hauls. The simple electrical posts resist vibration-related loosening that can interrupt circuits on rough roads. No active cooling is required, so reliability depends only on the vehicle supply and wiring condition.

Build and Mounting

The housing measures 5 3/4 inches wide, 6 3/4 inches high and 2 15/16 inches deep. A stud mount lets technicians fasten the lamp directly to a flat panel without a separate bracket. Electrical connection posts accept ring terminals for a secure, corrosion-resistant joint. The clear red lens is moulded into the housing, reducing entry points for moisture and road debris. This construction supports daily commercial service without specialised tools.

Highlights

  • Combined stop, turn and tail functions in one unit
  • Incandescent lighting provides reliable illumination
  • Square red lens design for clear visibility
  • Stud mount enables secure surface installation
  • Draws 0.6 to 2.1 A for efficient power use

Specifications

BrandGROTE

Questions about this item

How much current does the 52902 draw when running continuously?

The incandescent lamp pulls between .6 and 2.1 A depending on which function is active, so a constant tail-light load sits near the lower end while braking or signalling pushes it higher.

What mounting hardware and wiring method must already be on the vehicle?

The light uses a stud mount for surface installation and connects via posts, so the body needs a drilled hole for the stud and a mating connector or ring terminals for the posts.

Will the 52902 fit the same cut-out as a 6 3/4 in round combination light?

No — this unit is square at 5 3/4 in wide by 6 3/4 in tall, so a round opening would leave gaps and the stud pattern would not align.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.