We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square red LED stop tail turn light with stud mount and blunt cut wires

Grote

Grote 51972-5 LED stop/tail/turn light red

SKU CH-RGJ7-E6CYA

LED stop, tail and turn light with red square lens, surface-mount stud installation and blunt-cut wires drawing 0.16 to 0.26 A

  • LED technology draws only 0.16 to 0.26 amps for efficient power use
  • Red square lens provides clear stop, tail and turn signals
  • Stud mount with surface installation allows secure, removable fitting
  • Blunt-cut wires enable direct electrical connection without extra adapters
  • Compact 4 3/4 by 4 13/16 by 3 inch housing fits tight vehicle spaces

Grote 51972-5 LED stop/tail/turn light

The Grote 51972-5 is a square LED stop, tail and turn signal lamp with a red lens designed for surface mounting on commercial vehicles and trailers. It operates on a 0.16 to 0.26 A current draw and uses blunt cut wires for electrical connection. The stud mount allows for removable installation on compatible flat surfaces.

Blunt cut wires and stud mount

The blunt cut wires require the installer to terminate connections with appropriate connectors or splices for the specific vehicle wiring harness. The stud mount style secures the lamp directly to the mounting surface without a separate bracket, simplifying the hardware needed. The removable installation type allows the lamp to be detached for maintenance or replacement without removing the mounting hardware.

0.16 to 0.26 A current draw

The low current draw of 0.16 to 0.26 A reduces load on the vehicle electrical system compared to incandescent alternatives. Buyers needing a lamp with a specific sealed connector plug or a different mount pattern such as flange or grommet will need a different part. This unit is not suited for applications requiring a sealed plug-and-play harness connection.

Highlights

  • LED technology draws only 0.16 to 0.26 amps for efficient power use
  • Red square lens provides clear stop, tail and turn signals
  • Stud mount with surface installation allows secure, removable fitting
  • Blunt-cut wires enable direct electrical connection without extra adapters
  • Compact 4 3/4 by 4 13/16 by 3 inch housing fits tight vehicle spaces

Specifications

BrandGROTE

Questions about this item

Will the blunt-cut wires need crimping or soldering when I replace this light?

The light terminates in blunt-cut wires, so you will need to strip, crimp or solder them to your harness when swapping the unit.

At what current does the LED circuit reach its upper limit during continuous operation?

The specification lists a current range of 0.16 to 0.26 A, so the circuit peaks at 0.26 A under sustained load.

How warm does the housing get when the light runs all day on a trailer?

LED stop/tail/turn lights run much cooler than incandescent units, and the 0.16–0.26 A draw keeps housing temperature low during all-day operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.