We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round double-face turn lamp with red and amber lenses on a shallow pedestal base

Grote

Grote 50630 Turn Lamp DoubleFace ThinLine Red/Yellow machine shop hardware

SKU CH-66C2-7JFA5

Double-face incandescent stop, turn and tail lamp with red and amber lenses, pedestal mount and blunt-cut wire connections

  • Double-face design shows stop, turn and tail signals from both sides
  • Incandescent lamp draws 0.59 to 2.1 A for reliable brightness
  • Round 4 1/4 in lens fits standard pedestal mounts
  • Red and amber lenses meet common signalling colour requirements
  • Surface-mount pedestal with blunt-cut wires simplifies installation

Grote 50630 Turn Lamp Overview

The Grote 50630 is a double-face ThinLine lamp designed for machine-shop and vehicle applications. It combines stop, turn and tail functions in a single round housing with red and amber lenses. The unit mounts on a pedestal for surface installation and connects via blunt-cut wires. It is built new for immediate fitment.

Replaces Single-Face Incandescent Units

This lamp upgrades older single-face incandescent lights by adding a second visible face and a slimmer ThinLine profile. The jump is worth it when a vehicle or machine needs both red stop/tail and amber turn signals visible from multiple angles. Current draw ranges from .59 to 2.1 A depending on the active circuit.

Suits Pedestal-Mount Surface Installs

The lamp suits workshops and fleets that require a compact combination light with a 4 1/4 in diameter and 2 5/16 in depth for pedestal mounting. It is not for buyers who need a different lens colour, a flush-mount design or a lamp with an integrated connector instead of blunt-cut wires.

Highlights

  • Double-face design shows stop, turn and tail signals from both sides
  • Incandescent lamp draws 0.59 to 2.1 A for reliable brightness
  • Round 4 1/4 in lens fits standard pedestal mounts
  • Red and amber lenses meet common signalling colour requirements
  • Surface-mount pedestal with blunt-cut wires simplifies installation

Specifications

BrandGROTE

Questions about this item

What mounting surface and clearance does the 4 1/4 in diameter pedestal base need?

The lamp mounts on a flat surface using a pedestal base; allow at least 4 3/4 in height and 2 5/16 in depth behind the panel for the housing.

How are the blunt-cut wires connected, and which step is often missed?

Strip the blunt-cut wires and crimp or solder them to a mating connector such as part 68130 or 68170; the step often missed is sealing the splices against moisture.

When should the incandescent bulbs be replaced, and what current range applies?

Replace bulbs when they dim or fail; the circuit draws between .59 and 2.1 A depending on which function is active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.