Grote
Grote 49192 Thin Line Red LED RV Lighting 15 in
A 15 in red LED clearance lamp with polycarbonate housing, screw mounting and blunt-cut wires for permanent RV installation
- ColorRed
- Red clearance light meets FMVSS 108 and SAE P2 P3 standards
- LED technology rated for 100 000 hour lamp life
- Impact and vibration resistant polycarbonate housing and lens
- Low 0.07 amp draw reduces electrical load
- 15 inch rectangular bar mounts permanently with screw fasteners
Thin Line Red LED RV Bar Lamp 15 in
The Grote 49192 is a rectangular clearance lamp with a red polycarbonate lens and a thin-line profile that measures 15 inches wide. It uses LED technology rated for 100,000 hours of service life and meets FMVSS 108 and SAE P2, P3 standards for vehicle lighting. A polycarbonate housing provides impact and vibration resistance for permanent exterior mounting.
Suited for RV owners needing a low-profile red
This lamp fits installations that require a screw-mounted, 15-inch red clearance light with blunt-cut leads for direct wiring. Buyers who need a different lens color, a shorter or longer bar, or a plug-and-play connector should look at other models in the range.
15 inch overall width decides fit
The 15-inch width is the critical dimension that determines whether this bar lamp matches the mounting holes and clearance envelope on the vehicle. Verify the available space before purchase because no other length is offered for this part number.
Highlights
- Red clearance light meets FMVSS 108 and SAE P2 P3 standards
- LED technology rated for 100 000 hour lamp life
- Impact and vibration resistant polycarbonate housing and lens
- Low 0.07 amp draw reduces electrical load
- 15 inch rectangular bar mounts permanently with screw fasteners
Specifications
| Brand | GROTE |
|---|---|
| Color | Red |
Questions about this item
How long can the 15 in red LED bar run continuously before heat becomes an issue?
The LED technology and polycarbonate housing are rated for 100, 000 hours of lamp life with shock and vibration resistance for sustained operation
What is the power draw and heat output when the light stays on all day?
Current draw is 0.07 A at low voltage, and the impact-resistant polycarbonate housing dissipates heat without active cooling
Which mounting hardware and wiring supplies are required to install this clearance light?
Screw mounting uses the rectangular housing holes, and blunt-cut wires need connectors or solder for the electrical connection
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



