Grote
Grote 49172 Red Bar Lamp 15 Markers 17 in
Red incandescent marker bar with 15 snap-on lamps, 17 inches long, polycarbonate lens, FMVSS 108 compliant
- ColorRed
- Red marker bar meets FMVSS 108 and SAE P2 standards
- 15 incandescent markers give wide visibility on a 17 in polycarbonate housing
- Snap-on replacement lamps simplify maintenance without tools
- Blunt-cut wires allow direct permanent installation
- Bracket mount fits compatible electrical connection 69710
Grote 49172 Red Bar Lamp
The Grote 49172 is a rectangular red marker light designed for RV exterior use. It carries fifteen incandescent lamps in a single polycarbonate housing that meets FMVSS 108 and SAE P2 standards. The unit mounts permanently via a bracket and connects through blunt-cut wires compatible with Grote 69710. It suits owners who need a long, DOT-compliant marker strip.
Sustained load behaviour
Each lamp draws roughly one ampere, so the full bar pulls about fifteen amps continuously when lit. Incandescent output remains steady as long as vehicle voltage is stable, with no thermal throttling or duty-cycle limits. The polycarbonate lens and housing tolerate the heat generated during extended night driving. There is no PWM dimming or flicker to manage over long periods.
Thermals noise and power
Incandescent lamps convert most input power to heat, so the bar becomes warm to the touch after prolonged use. The polycarbonate housing dissipates that heat passively without fans, making operation completely silent. Current draw is a fixed fifteen amps at nominal twelve volts, imposing a predictable load on the RV electrical system. No additional cooling or noise mitigation is required.
Highlights
- Red marker bar meets FMVSS 108 and SAE P2 standards
- 15 incandescent markers give wide visibility on a 17 in polycarbonate housing
- Snap-on replacement lamps simplify maintenance without tools
- Blunt-cut wires allow direct permanent installation
- Bracket mount fits compatible electrical connection 69710
Specifications
| Brand | GROTE |
|---|---|
| Color | Red |
Questions about this item
How much current does the 49172 draw when all 15 markers run continuously?
The lamp draws 1 A total, so heat and power stay low even with all 15 markers lit all day.
Which electrical connector must I already have to install the 49172?
You need the compatible 69710 connection; the lamp ships with blunt-cut wires for that interface.
Will the 17 in red bar meet FMVSS 108 alongside my older clearance lights?
Yes, the polycarbonate lens carries SAE code P2 and meets FMVSS 108, so it matches existing legal markers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



