Grote
Grote 47233 Clearance Marker Lamp Amber RV Lighting
Amber LED clearance marker lamp meets FMVSS 108 and SAE P2, P3, PC standards for RV visibility
- ColorYellow
- LED technology provides efficient illumination
- FMVSS 108 compliance meets legal safety standards
- Amber lens colour improves side visibility
- Hermetic lens seal protects internal components
- PL-10 connector enables quick electrical installation
Grote 47233 Amber Clearance Lamp
The Grote 47233 is an LED clearance marker lamp with an amber round lens. It meets FMVSS 108 requirements and carries SAE codes P2, P3 and PC for front, side and rear clearance functions. The hermetic lens-to-housing seal protects the internal LED from moisture and road debris. It draws 0.06 A through a PL-10 connector and mounts via a bracket and grommet.
Replaces Incandescent Marker Lights
This lamp replaces aging incandescent clearance lights that have faded lenses, corroded sockets or failed filaments. The LED source eliminates filament breakage and reduces current draw to 0.06 A, easing load on the vehicle electrical system. The upgrade is worth it when the original housing is cracked, the seal has leaked or the lamp no longer passes a DOT inspection. Compatible pigtail models include 66800, 66801, 66840, 66850, 66851, 67001 and 67050.
Verify Mounting and Connector Before Ordering
Confirm the existing mounting hole pattern matches the bracket and grommet design used on this 2 1/2 in diameter lamp. Ensure the vehicle harness uses a PL-10 connector or plan to install one of the listed compatible pigtails. Check that the lens colour amber is the correct colour for the intended clearance position per local regulations.
Highlights
- LED technology provides efficient illumination
- FMVSS 108 compliance meets legal safety standards
- Amber lens colour improves side visibility
- Hermetic lens seal protects internal components
- PL-10 connector enables quick electrical installation
Specifications
| Brand | GROTE |
|---|---|
| Color | Yellow |
Questions about this item
What size hole does the 2 1/2 in round lamp need for grommet mounting?
Cut a 2 1/2 inch diameter hole in the panel; the supplied grommet snaps into that opening and holds the lamp flush.
Which connector plugs into the PL-10 socket on the back of the Grote 47233?
Use Grote pigtail 66800, 66801, 66840, 66850, 66851, 67001 or 67050 — push the PL-10 plug straight in until it clicks, do not twist.
When should the hermetic lens-to-housing seal be inspected on this clearance marker?
Check the amber lens seal at each annual DOT inspection; replace the entire lamp if moisture appears inside or the lens clouds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



