We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grote 47183 amber oval LED clearance marker lamp with polycarbonate lens and bracket mount

Grote

Grote 47183 Clearance Marker Lamp P2 PC Oval

SKU CH-20XD-Q17EG

LED clearance marker lamp with FMVSS 108 P2 rating, polycarbonate housing and blunt-cut wires

  • FMVSS 108 compliant for legal road use
  • SAE P2 rated lens meets side-marker standards
  • LED technology draws only 0.12 A current
  • Polycarbonate housing and lens resist impact and UV
  • Replaceable lens design simplifies maintenance

Grote 47183 P2 Clearance Marker Lamp

The Grote 47183 is a rectangular amber clearance marker lamp built to FMVSS 108 and SAE P2 standards. It uses six LEDs in a polycarbonate housing with a replaceable lens. The lamp mounts permanently via a bracket and connects with blunt-cut wires. It is intended for commercial vehicle owners and fleet managers who need a compliant, long-life marker light.

Thermals noise and power draw

The LED array draws 0.12 A at operating voltage, producing minimal heat during normal use. There are no moving parts or cooling fans, so the lamp runs silently. The polycarbonate housing and lens are designed to dissipate the low thermal load without additional ventilation. Power consumption stays constant whether the lamp is used as a single unit or in a series installation.

Replaces aging incandescent marker lamps

This lamp directly replaces older incandescent clearance markers that use the same bracket footprint and blunt-cut wiring. The 10-year manufacturer warranty and replaceable lens reduce downtime for fleets that currently service cracked lenses or burned-out bulbs frequently. The jump is worthwhile when maintenance intervals on existing lamps fall below the expected LED service life or when FMVSS 108 compliance must be documented.

Highlights

  • FMVSS 108 compliant for legal road use
  • SAE P2 rated lens meets side-marker standards
  • LED technology draws only 0.12 A current
  • Polycarbonate housing and lens resist impact and UV
  • Replaceable lens design simplifies maintenance

Specifications

BrandGROTE

Questions about this item

How is the Grote 47183 oval marker lamp mounted and where do installers most often go wrong?

The lamp uses a bracket for permanent installation. The blunt-cut wires must be spliced and sealed properly; skipping waterproof connectors lets moisture corrode the circuit.

What part of the 47183 will need replacement first during its service life?

The polycarbonate lens is marked replaceable. UV exposure and road debris typically cloud or crack the lens before the six internal LEDs or the housing fail.

At what point does the 47183 hit its thermal or electrical limit during continuous operation?

The lamp draws 0.12 A at 12 V. Its polycarbonate housing and lens are rated to FMVSS 108 and SAE P2, so the design limit is the voltage supply staying within vehicle spec.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.