Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00918773BTC
In stock
Gridmann
Gridmann Commercial Bun Pan Rack 10 Sheet 18x26
A commercial bun pan rack holds ten full-size 18 by 26 inch sheet pans or twenty half-size 18 by 13 inch pans on welded tray slides with three-inch spacing.
- TypeKitchen
- Holds 10 full-size 18x26 sheet pans or 20 half-size 18x13 pans
- 16 gauge steel frame with welded tray slides for heavy-duty use
- 3 inch spacing between slides fits standard bakery pans
- 5 inch rubber-coated swivel casters with 2 locking brakes for mobility
- Four cross support bars add stability during transport and storage
Commercial bakery rack for high-volume kitchens
This Gridmann rack holds ten full-size 18 x 26 inch sheet pans or twenty half-size pans. It is built from 16 gauge steel with welded tray slides and four cross support bars. The unit suits bakeries, cafeterias and pizzerias that need dense vertical storage.
Mobility and stability on rubber-coated casters
Four 5 inch swivel casters make the rack easy to move between prep areas, and two locking brakes keep it stationary during loading. The 3 inch spacing between slides allows quick pan access without tipping. Assembly requires a wrench and the supplied hardware.
Replaces stationary shelving when floor space is
The compact 26 x 20-3/8 x 38-1/4 inch footprint fits narrow aisles while doubling pan capacity compared to single-layer racks. It is not suited for operations needing heated holding or enclosed cabinet storage.
Highlights
- Holds 10 full-size 18x26 sheet pans or 20 half-size 18x13 pans
- 16 gauge steel frame with welded tray slides for heavy-duty use
- 3 inch spacing between slides fits standard bakery pans
- 5 inch rubber-coated swivel casters with 2 locking brakes for mobility
- Four cross support bars add stability during transport and storage
Specifications
| Brand | Gridmann |
|---|---|
| Type | Kitchen |
Questions about this item
How do I assemble the Gridmann bun pan rack and which step is most often missed?
Bolt the four cross support bars between the frame posts using the supplied hardware and a wrench; the step most often missed is tightening every bolt before loading pans.
What part will need replacement first on this rack?
The rubber coating on the 5" swivel casters wears down with daily rolling and braking, so plan to replace the casters when the tread is smooth.
What limit appears first when the rack is fully loaded and moved constantly?
The 16 gauge steel frame and welded tray slides handle the weight, but the caster brakes are the first component to show fatigue under sustained heavy transport.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
