Grey Pneumatic
Grey Pneumatic 1010UM 3/8" Drive 10mm Metric Socket 6 Point
A 10mm, 3/8 inch drive impact socket with a universal 6-point design for fastener work
- 10 mm metric socket fits common fasteners
- 3/8 inch drive works with standard ratchets
- 6 point design grips flats to reduce rounding
- Impact rated for use with power tools
- Universal joint allows access at angles
Grey Pneumatic 1010UM 10mm Impact Socket
The Grey Pneumatic 1010UM is a 10mm metric socket built for 3/8 inch drive impact wrenches. Its universal joint design allows access to fasteners at difficult angles. The six-point profile grips flat sides of nuts and bolts to reduce rounding. This tool suits professional mechanics and serious DIY users who need durable impact-grade performance.
Ideal for tight fasteners; not for high-torque only
Mechanics working in confined engine bays or suspension areas benefit from the universal joint's range of motion. The impact construction withstands repeated hammer blows from air or cordless guns. Buyers who only need straight-line access on high-torque bolts may prefer a standard deep or shallow impact socket without the joint mechanism. This socket does not replace a dedicated breaker bar attachment.
3/8 inch drive universal 6-point 10mm metric
The single specification that decides fitment is the 3/8 inch square drive combined with a 10mm hex opening and universal joint. Verify that your impact wrench or ratchet uses a 3/8 inch anvil and that the fastener is a 10mm metric size. The six-point geometry matches standard metric hex heads. No other drive size or hex dimension will work with this specific model.
Highlights
- 10 mm metric socket fits common fasteners
- 3/8 inch drive works with standard ratchets
- 6 point design grips flats to reduce rounding
- Impact rated for use with power tools
- Universal joint allows access at angles
Specifications
| Brand | GREY PNEUMATIC |
|---|
Questions about this item
Does the 10mm impact socket generate noticeable heat or noise during extended use?
The 6-point impact socket is a passive hand tool with no moving parts, so it produces no noise or heat during operation.
What drive tools do I already need to use the 3/8" drive 1010UM socket?
You need a 3/8" drive ratchet, breaker bar or impact wrench to turn the socket.
Will the 6-point 10mm socket fit the older 3/8" drive ratchets I already own?
Yes, the standard 3/8" square drive fits any 3/8" drive ratchet or extension you currently use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
