Grey Pneumatic
Grey Pneumatic 1" Drive x 2-3/8" Deep Socket
A 1-inch drive deep socket made from chrome-molybdenum alloy steel for impact tools
- High-torque drive reduces fastener corner wear
- Chrome-molybdenum alloy steel withstands impact-tool stress
- Tested to industrial specifications for reliable performance
- Lifetime warranty backs professional-grade durability
- 1" drive x 2-3/8" deep socket reaches tight areas
1-Inch Drive Impact Socket
The Grey Pneumatic socket fits a 1-inch square drive and measures 2-3/8 inches deep. It is built from chrome-molybdenum alloy steel for professional impact-tool users who need to reach recessed fasteners on heavy equipment.
High-Torque Drive Installation
The six-point high-torque drive contacts fastener flats instead of corners, reducing rounding on both the socket and the bolt. Ensure the retaining pin and O-ring are seated before use; a loose pin is the most common cause of the socket separating from the anvil under load.
Sustained Impact Durability
The alloy-steel construction absorbs repeated hammer blows without mushrooming or cracking. The deep well maintains wall thickness during long tightening cycles, so torque delivery stays consistent on large structural bolts.
Highlights
- High-torque drive reduces fastener corner wear
- Chrome-molybdenum alloy steel withstands impact-tool stress
- Tested to industrial specifications for reliable performance
- Lifetime warranty backs professional-grade durability
- 1" drive x 2-3/8" deep socket reaches tight areas
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the 1" drive deep socket is engaging correctly after setup?
The high-torque drive design reduces corner wear on both the fastener and the socket wall while transferring increased torque; smooth engagement and no rounding on the fastener corners indicate it is working as intended.
What comes in the box with the 1" drive x 2-3/8" deep socket and what must be purchased separately?
The box contains the single 1" drive deep impact socket made of chrome-molybdenum alloy steel; a compatible 1" drive impact wrench or breaker bar is not included and must be bought separately.
Which Grey Pneumatic socket version should I choose for a 2-3/8" fastener on a 1" drive impact tool?
Select the 1" drive x 2-3/8" deep impact socket (SKU 28631682, UPC 729440476465) — it is engineered to current industrial specifications for professional use with 1" drive impact tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
